| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| On deployments where the remote-support capability is licensed and enabled, an authenticated System Administrator who also possessed the key protecting the submitted data could redirect the underlying system's outbound support connection to a destination of their choosing. That destination could then have operating-system commands executed on the node and receive their output, potentially resulting in remote code execution with the privileges of a local service account. |
| Improper Verification of Source of a Communication Channel in the ADS discovery of the Go implementation of Apache PLC4X (PLC4Go) allows an attacker able to send UDP datagrams to the discovering host to redirect subsequent connections to an arbitrary, attacker-chosen address. The discovery result's connection
address was derived from the AmsNetId claimed in the response body rather than from the datagram's actual source address. One spoofed discovery response can therefore insert an inventory entry pointing at any host, including hosts outside the local network, and an application that connects to discovered devices
will open its ADS session, including any configured route credentials, to that host.
Additionally, discovery listeners in both implementations can be disabled by a single malformed datagram:
- In PLC4Go ADS discovery, a short version block causes a panic that ends the listener for the rest of the discovery call, so legitimate devices answering afterwards are not reported.
- In PLC4J, the ADS and EtherNet/IP discoverers stop on an unhandled exception from a malformed response.
- The PLC4J Modbus discoverer can be made to spin indefinitely, consuming a CPU core, by a scanned host that sends a partial response.
Exploitation requires the application to invoke the discovery API, which is opt-in, and for the connection redirect, to act on the discovered items.
This issue affects Apache PLC4X: PLC4Go from 0.11.0 before 1.0.0; PLC4J ADS and Modbus drivers from 0.10.0 before 1.0.0; PLC4J EtherNet/IP driver from 0.11.0 before 1.0.0. PLC4Go is consumed as the Go module github.com/apache/plc4x/plc4go; versions refer to the corresponding Apache PLC4X releases.
Users are recommended to upgrade to version 1.0.0, which fixes the issue. Version 1.0.0 derives the connection address from the datagram's source address and logs a warning when the claimed AmsNetId disagrees with it. |
| The IPv6 branch of the FastCGI client access check compares only the first 12 bytes of a 16-byte IPv6 address, so listen.allowed_clients matches on a /96 prefix instead of the exact address. An attacker who can source an address sharing the first 96 bits with an allowed one passes the check and reaches the FastCGI endpoint. |
| The Android application "YAMAP -Social Trekking GPS App" contains an improper access control vulnerability in its WebView implementation. The in-app browser may cause information leakage from the app or redirect users to unintended websites. |
| WeenyGenius, a computer lab management system by Howyar Technologies, has an Origin Validation Error vulnerability. Unauthenticated attackers on the same network can spoof the teacher workstation and send broadcast packets, causing student computers to attempt to establish a connection with the attacker. |
| Incorrect authorization in ServiceWorker in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to bypass web origin policy via a crafted HTML page. (Chromium security severity: Low) |
| Impact:
When using Socks5ProxyAgent, undici reuses a single connection pool across different origins without verifying that the pool's origin matches the requested origin. All requests are dispatched through the pool connected to the first origin, regardless of the intended destination.
This causes cross-origin request routing: credentials and request data intended for origin B are sent to origin A, responses from the wrong origin are trusted, and HTTPS requests may be silently downgraded to HTTP.
Impacted users are applications that use Socks5ProxyAgent (directly or via setGlobalDispatcher) and make requests to more than one origin.
This was introduced in undici 7.23.0 via PR #4385 and affects all versions through 8.1.0.
Patches:
Upgrade to undici v7.26.0 or v8.2.0.
Workarounds:
Use a separate Socks5ProxyAgent instance per origin, or avoid using Socks5ProxyAgent with multiple origins. |
| The Canva Android App before 2.376.0 allowed an external origin to be loaded in a privileged WebView. A threat actor who controls the page loaded by the user is able to communicate with Canva using the user’s session. |
| Medical Practice Management System developed by Le-yan has a Remote Code Execution vulnerability. Unauthenticated remote attackers can execute arbitrary OS commamnds via a crafted HTML page. |
| The Erlang/OTP ssl TLS 1.2 (and earlier) and DTLS client does not verify that the cipher suite selected by the server in ServerHello was among the suites offered by the client in ClientHello. The client-side tls_handshake:hello/5 handler validates the negotiated protocol version and the downgrade sentinel but hands the server-chosen suite directly to ssl_handshake:handle_server_hello_extensions/9, which installs it without a membership check. The TLS 1.3 client path performs this check (per RFC 8446), so it is not affected.
An on-path attacker between the client and the intended server can respond with a ServerHello selecting an anonymous key exchange suite such as TLS_DH_anon_* or TLS_ECDH_anon_* that the client never offered. Anonymous suites do not require the server to present a certificate, so the entire verify_peer and cacerts configuration is bypassed: the attacker completes the handshake with its own ephemeral parameters, no certificate is validated, no hostname is checked, and ssl:connect returns {ok, Socket}. All subsequent application traffic is readable and modifiable by the attacker.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.15, from OTP 28.0 before OTP 28.5.0.4, and from OTP 29.0 before OTP 29.0.4, corresponding to ssl from 5.3.4 before 11.2.12.11, from 11.3 before 11.6.0.4, and from 11.7 before 11.7.4. Whether OTP before OTP 17.0, corresponding to ssl before 5.3.4, is affected is unknown. |
| Same-origin policy bypass in the Audio/Video: Playback component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| A flaw in Node.js Permission Model network enforcement leaves Unix Domain Socket (UDS) server operations without the required permission checks, while all comparable network paths correctly enforce them.
As a result, code running under `--permission` without `--allow-net` can create and expose local IPC endpoints, allowing communication with other processes on the same host outside of the intended network restriction boundary.
This vulnerability affects Node.js **25.x** processes using the Permission Model where `--allow-net` is intentionally omitted to restrict network access. Note that `--allow-net` is currently an experimental feature. |
| go-chi chi versions >= 5.2.1 and before 5.3.0 contain an IP spoofing vulnerability in the RealIP middleware, which blindly trusts the first (leftmost) value of the X-Forwarded-For HTTP header. A remote attacker can bypass IP-based access control lists and rate-limiting mechanisms, and forge log entries, by supplying a spoofed IP address in the X-Forwarded-For header. The issue is fixed in version 5.3.0. |
| NextAuth.js provides authentication for Next.js. Prior to@auth/core 0.41.3 and next-auth 4.24.15 and 5.0.0-beta.32, Auth.js stores the OAuth/OIDC anti-CSRF checks state, nonce, and the PKCE verifier in global cookies that are not bound to the provider that created them. On callback, a check value minted during a sign-in started with one provider can satisfy the callback for a different provider because the stored cookie is not verified against the callback provider's identity, including the provider ID, issuer, client ID, or redirect URI. In a multi-provider application that permits account linking while logged in, when one provider's authorization request is observable and a target provider callback can be satisfied without a PKCE verifier, an attacker can lure a victim into starting a legitimate same-origin flow and link the attacker's target-provider account to the victim's Auth.js user. The linked provider grants the attacker persistent sign-in to the victim's account, while cross-site request forgery alone is insufficient. This issue is fixed in @auth/core 0.41.3 and next-auth 4.24.15 and 5.0.0-beta.32. |
| Insufficient policy enforcement in FileSystem in Google Chrome prior to 151.0.7922.72 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: High) |
| Insufficient policy enforcement in ServiceWorker in Google Chrome prior to 151.0.7922.72 allowed a remote attacker to bypass same origin policy via a crafted HTML page. (Chromium security severity: Medium) |
| Inappropriate implementation in SurfaceCapture in Google Chrome prior to 151.0.7922.72 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Low) |
| Inappropriate implementation in Autofill in Google Chrome on Android prior to 151.0.7922.72 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| Tina is a headless content management system. In versions prior to @tinacms/app 2.5.6 and tinacms 3.9.3, cross-origin postMessage handlers and a rich-text URL-sanitization bypass enable stored XSS and session takeover. The library registers window message listeners — the useTina overlay handler, the OAuth authentication popup handler, and the admin↔preview iframe GraphQL reducer — that act on event.data without verifying event.origin or event.source and post messages using non-specific target origins, while insufficient URL sanitization in rich-text content allows malicious URLs to persist and execute. A page the victim visits (or a window in an opener/iframe relationship with a Tina admin) can forge messages to drive the editor, inject preview content, or observe/forge the OAuth popup channel to take over an authenticated editing session. This issue has been fixed in versions @tinacms/app 2.5.6 and tinacms 3.9.3. |
| webpack-dev-server versions 5.2.5 and earlier expose two internal developer endpoints, /webpack-dev-server/open-editor and /webpack-dev-server/invalidate, that perform state-changing actions on any GET request without verifying that the request originated from the dev server's own page. Any website a developer visits while the dev server is running can trigger these endpoints cross-origin with no interaction beyond the visit. An attacker can open an arbitrary existing local file in the developer's editor, including files outside the project root, and repeated requests can spawn editor processes and force recompilations that degrade the developer's machine. Patches: upgrade to webpack-dev-server 5.2.6. Workarounds: none. |
