| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Undo the registration when enabling the histogram trigger fails
Commit 6f86bdeab633 ("tracing: Fix bad hist from corrupting named_triggers
list") described how a trigger that is registered but not on file->triggers
ends up freed while still on the global named_triggers list, and moved the
registration down so that hist_trigger_enable() follows it immediately. One
path still gets there. hist_trigger_enable() adds the trigger and takes it
straight back out when the event cannot be enabled:
list_add_tail_rcu(&data->list, &file->triggers);
update_cond_flag(file);
if (trace_event_trigger_enable_disable(file, 1) < 0) {
list_del_rcu(&data->list);
update_cond_flag(file);
ret--;
}
so the list walk in hist_unregister_trigger() matches nothing, test stays
NULL, and the ->free() that would call del_named_trigger() is skipped.
out_unreg falls through to out_free, which frees the trigger anyway:
BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0
Read of size 8 at addr ffff8880091d3160 by task init/1
find_named_trigger+0xac/0xc0
hist_register_trigger+0xc1/0xa00
event_hist_trigger_parse+0x3146/0x6af0
event_trigger_write+0xce/0x160
Freed by task 69:
kfree+0x154/0x420
trigger_kthread_fn+0xfd/0x160
Leave the trigger where hist_unregister_trigger() can find it and let that
undo the registration, which is the only code that knows all of what
cmd_ops->init() took: the named list entry, the hist_pad reference, the
reference on the trigger a named histogram is shared with, and the copied
cmd_ops. It also pairs the failed trace_event_trigger_enable_disable(),
whose sm_ref and buffered event reference are otherwise left behind.
Since ->free() releases trigger_data and, for a trigger that does not share
its histogram, hist_data with it, out_unreg can no longer fall through to
out_free. For a trigger that does share, hist_register_trigger() has
already destroyed the caller's hist_data, so the fall-through was reading
freed memory there as well.
Move the enable_timestamps check in hist_unregister_trigger() above the
->free() call for the same reason: hist_data does not outlive it once the
trigger being removed is the one that owns it. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Take trace_array reference when opening a tracer options file
When a tracer option file is opened, it is passed a descriptor that points
to an element on the trace_array's topts array. This element has
information to find the trace array and other information. It uses this
element to take a reference of the trace_array so that the trace_array
does not get removed while this file is opened.
Unfortunately, there's a race condition where the element itself could be
freed by the removal of the instance the trace_array represents causing a
use-after-free as this element that is used to find the trace_array to
increment its reference counter is also freed when the instance is
removed.
To solve this, add a trace_array_tracer_options_get() helper function that
will take the address of the element that is passed to the open function
by the inode->i_private pointer and search all the trace_arrays under a
lock to find the one that the element's address is in the range of the
trace_arrays topts array elements. When a match happens, that trace_array's
reference would be increased.
Note, there's a race where if an admin was deleting and creating trace
instances at the same time and the memory of the old trace_array's array
matched the memory of the new trace_array that it could in theory open the
option from the wrong trace array. But we do not care because it would be
stupid to perform that kind of action. As long as the only thing that can
happen is that the option from the wrong trace array is used and doesn't
crash the kernel it will only make the user confused. But if they are
doing something stupid like this, they are already confused, so no harm
done. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: fork: Initialize function graph state before copy_exec_state()
dup_task_struct() copies the parent's task_struct, including ret_stack.
ftrace_graph_init_task() clears the copied function graph state, but it
currently runs after copy_exec_state().
For non-CLONE_VM forks, copy_exec_state() allocates a new task_exec_state.
If that allocation fails, copy_process() reaches bad_fork_free and
free_task() calls ftrace_graph_exit_task(). Since the child still carries
the parent's ret_stack pointer, the unwind frees the parent's active
function graph return stack. The parent subsequently accesses freed memory
from function_graph_enter_regs().
KASAN reports:
[ 22.190920] ==================================================================
[ 22.195899] BUG: KASAN: slab-use-after-free in function_graph_enter_regs+0xa76/0xb90
[ 22.200747] Write of size 8 at addr ff110000054dc0a8 by task repro/1
[ 22.205134]
[ 22.210770] CPU: 0 UID: 0 PID: 1 Comm: repro Not tainted 7.2.0-07732-g9328b3b03bdc-dirty #3 PREEMPT(lazy)
[ 22.212576] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 22.213750] Call Trace:
[ 22.215271] <TASK>
[ 22.216242] ? ftrace_stub_direct_tramp+0x10/0x10
[ 22.217774] dump_stack_lvl+0x4e/0x70
[ 22.220531] print_report+0x157/0x4b4
[ 22.223202] ? fixup_red_left+0x9/0x30
[ 22.224407] ? complete_report_info+0x83/0x110
[ 22.226679] ? function_graph_enter_regs+0xa76/0xb90
[ 22.228084] kasan_report+0xce/0x100
[ 22.230109] ? function_graph_enter_regs+0xa76/0xb90
[ 22.232860] ? stack_trace_save+0x4/0xd0
[ 22.234156] function_graph_enter_regs+0xa76/0xb90
[ 22.236090] ? kasan_save_stack+0x30/0x50
[ 22.237752] ? __pfx_function_graph_enter_regs+0x10/0x10
[ 22.238694] ? ring_buffer_lock_reserve+0x345/0xf80
[ 22.239628] ? stack_trace_save+0x4/0xd0
[ 22.242121] ? stack_trace_save+0x4/0xd0
[ 22.243588] ftrace_graph_func+0xda/0x160
[ 22.245362] ? ftrace_stub_direct_tramp+0x10/0x10
[ 22.246520] 0xffffffffa0000095
[ 22.250528] ? stack_trace_save+0x9/0xd0
[ 22.251757] ? ring_buffer_unlock_commit+0x11d/0x5c0
[ 22.253152] stack_trace_save+0x9/0xd0
[ 22.254264] kasan_save_stack+0x30/0x50
[ 22.273631] kasan_save_track+0x14/0x30
[ 22.276763] kasan_save_free_info+0x3b/0x70
[ 22.278296] __kasan_slab_free+0x43/0x70
[ 22.280157] kmem_cache_free+0xbf/0x3b0
[ 22.282963] ? ftrace_stub_direct_tramp+0x10/0x10
[ 22.284001] free_task+0xa2/0x160
[ 22.285699] ? ftrace_stub_direct_tramp+0x10/0x10
[ 22.286752] copy_process+0x2aae/0x7bc0
Initialize the child function graph state immediately after
dup_task_struct(), before the first fallible operation. |
| In the Linux kernel, the following vulnerability has been resolved:
reboot: fix cad_pid use-after-free race
cad_pid is a single kernel-wide struct pid pointer. proc_do_cad_pid()
reads it and passes it to pid_vnr() without protecting the lifetime of
the referenced struct pid. A concurrent writer can replace cad_pid and
drop the final reference to the old struct pid after the reader has
loaded the pointer but before pid_vnr() has finished dereferencing it,
causing a use-after-free.
kill_cad_pid() has the same lifetime race when it passes cad_pid to
kill_pid().
At the time this issue was reported, an unprivileged user could reach the
sysctl through user and PID namespaces because cad_pid was registered in
pid_table[]. Moving cad_pid back to the global reboot sysctl table
corrected that namespace and permission mismatch, but did not fix the
underlying lifetime race.
Fix this by treating cad_pid as an RCU-protected pointer at both read
sites and by waiting for a grace period before dropping the old reference
on the write side.
call_rcu(&old_pid->rcu, ...) cannot be used here because free_pid()
also queues pid->rcu; queueing the same rcu_head twice can corrupt the
RCU callback list.
Original KASAN crash stack:
kernel/pid.c:545 pid_nr_ns() # reads freed pid->level
kernel/pid.c:556 pid_vnr() # calls pid_nr_ns()
kernel/pid.c:775 proc_do_cad_pid() # calls pid_vnr(cad_pid) |
| In the Linux kernel, the following vulnerability has been resolved:
configfs: pin the symlink target's dirent instead of chasing ->ci_dentry
create_link() reads the target's configfs_dirent from
item->ci_dentry->d_fsdata, relying on the item reference taken by
get_target(). That reference pins the item, not its dentry: the dentry is
pinned by DCACHE_PERSISTENT, which configfs_remove_dir() releases via
simple_rmdir() while the item is still alive. A symlink racing with rmdir
of its target can therefore find ->ci_dentry freed and its dirent
released, triggering WARN_ON(!atomic_read(&sd->s_count)) in configfs_get().
Take the dirent in get_target() as well, under ->d_lock and atomically
with the item reference, and pass it down to create_link(). A hashed
dentry has not been killed yet, so its ->d_fsdata reference keeps the
dirent alive there. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Set the trace clock before registering the histogram trigger
hist_register_trigger() puts the trigger on the global named_triggers
list in cmd_ops->init(), and only then sets the trace clock:
if (data->cmd_ops->init) {
ret = data->cmd_ops->init(data);
if (ret < 0)
goto out;
}
if (hist_data->enable_timestamps) {
ret = tracing_set_clock(file->tr, hist_data->attrs->clock);
if (ret) {
hist_err(tr, HIST_ERR_SET_CLOCK_FAIL, errpos(clock));
goto out;
}
The clock string is not checked anywhere before that call, so a named
trigger using common_timestamp with an unknown clock fails after it has
already become findable. event_hist_trigger_parse() then frees it
without taking it off the list, and the next lookup by name reads the
freed object:
~# cd /sys/kernel/tracing/events/sched/sched_switch
~# echo 'hist:name=foo:keys=common_pid:ts=common_timestamp:clock=bogus' > trigger
bash: echo: write error: Invalid argument
~# echo 'hist:name=foo:keys=common_pid' > trigger
BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0
Read of size 8 at addr ffff88800915d760 by task init/1
find_named_trigger+0xac/0xc0
hist_register_trigger+0xc1/0x900
event_hist_trigger_parse+0x3146/0x6af0
event_trigger_write+0xce/0x160
Freed by task 63:
kfree+0x154/0x420
trigger_kthread_fn+0xfd/0x160
Set the clock before the trigger is registered, so that nothing which
can fail runs after it is published, the way commit 6f86bdeab633
("tracing: Fix bad hist from corrupting named_triggers list") moved the
registration below the rest of the setup.
tracing_set_filter_buffering() is reference counted, so the init failure
path has to drop the reference that the clock block now takes first. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix fib6 walker UAF on seq stop
ipv6_route_iter_active() treats a walker in FWS_U at the table root as
already unlinked. fib6_del_route() can move a still-linked walker into
that same state when the current leaf is the last route at the root,
so ipv6_route_native_seq_stop() skips fib6_walker_unlink(). The seq
private object can then be freed while it remains on
net->ipv6.fib6_walkers. A later route deletion walks the dangling list
and uses the freed walker.
Use the list head as membership state and reinitialize it when
unlinking. Keep the existing w->node check so a never-started iterator
with a zeroed private object is not treated as linked.
The same stop helper is used by /proc/net/ipv6_route and by the BPF
ipv6_route iterator. The BPF show path only widens the race. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: restore the XDP program pointer when pre-allocation fails
mana_xdp_set() publishes the new program into apc->bpf_prog before it
allocates anything, because mana_pre_alloc_rxbufs() sizes the buffers
from it via mana_get_rxbuf_cfg(). When that allocation fails the
function returns the error directly, skipping the err_dealloc_rxbuffs
label which is the only place that restores the previous pointer.
The attach is reported as failed, so the BPF core drops the reference it
held for the caller and the program can be freed, while apc->bpf_prog
still points at it. The next consumer of mana_xdp_get() - typically
mana_chn_setxdp() from mana_alloc_queues() on the following ifup, or
after a TX timeout reset - then calls bpf_prog_add() on freed memory.
This is reachable from an ordinary "ip link set dev ethX xdp obj ..."
whenever the per-queue RX buffer pre-allocation cannot be satisfied.
Restore the previous program on that error path. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Allow list_del during perf_event_overflow()
A PMU might use perf_sched_cb_inc() and perf_sched_cb_dec()
interface to get the PMU call back function pmu::sched_task
invoked at schedule in and schedule out. This is achieved
by walking along the list anchored by sched_cb_list.
The following scenario might lead to a list corruption.
perf_pmu_sched_task()
for_each_list_entry(..., &sched_cb_list)
+--> __perf_pmu_sched_task()
+--> event->pmu->sched_task())
+--> PMU_push_sample()
+--> perf_event_overflow()
+--> __perf_event_overflow()
+--> pmu->stop()
+--> perf_sched_cb_dec()
remove entry from sched_cb_list
while list node in use.
This happens when ioctl(fd, PERF_EVENT_IOC_REFRESH, xxx) has been
invoked and perf_event::event_limit hits zero.
Prevent the list corruption and convert for_each_list_entry()
to for_each_list_entry_safe(). |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (corsair-cpro) Remove debugfs entries when probe fails
ccp_debugfs_init() registers debugfs files whose private data is the devm
allocated ccp. If hwmon_device_register_with_info() fails right after it,
ccp_probe() returns without removing them: the HID core then frees ccp,
and ccp_remove() is not called for a failed probe, so the files stay
behind. Reading one of them dereferences the freed pointer.
Remove the debugfs entries on that error path. debugfs_remove_recursive()
waits for readers already inside the show callbacks, so ccp is no longer
reachable through debugfs by the time probe returns. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: ice: don't dereference pointers from TP_printk()
After forwarding net-next during the v7.3 merge window we started
seeing:
TRACE EVENT ERROR: Event ice_tx_dim_work has double dereference in TP_printk: REC->q_vector->tx.tx_ring->q_index
WARNING: kernel/trace/trace_events.c:420 at test_double_dereference.cold+0x39/0x4b
this is due to extra checks added in tracing subsystem in
commit b5cc230af5e5 ("tracing: Warn when an event dereferences a pointer in TP_printk()").
Printing happens long after the event was recorded, by which point
the pointers may be invalid (the ring or the dim instance).
Copy the eight scalars into the event instead. |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer where improper cleanup of reference counts during error paths could lead to a use-after-free condition. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: platform: Use acpi_bus_get_primary_device()
The acpi_get_first_physical_node() usage in acpi_platform_fill_resource()
and acpi_create_platform_device() is generally unsafe because in theory
the device returned by it may be freed at any time [1].
It is also inefficient because acpi_get_first_physical_node() is called
multiple times for the same argument which can be avoided.
Address these issues by using acpi_bus_get_primary_device() instead of
acpi_get_first_physical_node() and adjusting the code to call it just
once at the beginning of and acpi_create_platform_device() and drop
the device reference acquired by it upon the return from that function. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (corsair-cpro) Create debugfs entries after hwmon registration
ccp_debugfs_init() registers debugfs files whose private data is the devm
allocated ccp. It runs before hwmon_device_register_with_info(), so when
that registration fails, ccp_probe() returns with the files still in
place. The HID core then frees ccp, and ccp_remove() is not called for a
failed probe, so nothing removes them later either. Reading one of the
files dereferences the freed pointer.
Create the debugfs entries only after the hwmon device has been
registered, so no failing path can leave them behind.
The two version queries stay where they are. They send USB commands
without holding ccp->mutex, which is only safe as long as nothing else
can call send_usb_cmd(); once the hwmon device is registered its
callbacks can do so concurrently. Only the debugfs creation moves, and
it is told which queries succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: Fix UAF of btusb_data by rx_work
btusb_close() and btusb_flush() cancel data->rx_work with the
asynchronous cancel_delayed_work(), so if btusb_rx_work() is already
running on another CPU it keeps running after the cancel returns.
btusb_disconnect() calls hci_unregister_dev(), which invokes
btusb_close(), and then frees the btusb_data. A still running
btusb_rx_work() then dereferences the freed data:
while ((skb = skb_dequeue(&data->acl_q)))
data->recv_acl(data->hdev, skb);
Use cancel_delayed_work_sync() instead. In btusb_close() the cancel also
has to happen after btusb_stop_traffic(), otherwise an URB completion
racing with the cancel can requeue the work right after it has been
waited for. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_input: stop callbacks before unregistering input device
virtinput_remove() unregisters the input device before resetting the
virtio device. virtinput_recv_events() drops vi->lock around input_event(),
so clearing vi->ready does not stop a callback that passed the entry check.
It can still use vi->idev, requeue buffers and kick the queue.
Reset first, as virtinput_freeze() already does. With the preceding core
change, reset waits for callbacks before input_unregister_device() can
free vi->idev. Recheck vi->ready after taking the lock again: keep draining
completed events so an input packet is not truncated, but stop requeueing
buffers and kicking the queue.
With evdev attached, input_unregister_handle() currently waits for an RCU
grace period, which also waits out IRQ callbacks. This masks the lifetime
bug on PCI and MMIO, but does not protect sleepable callbacks on other
transports. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_input: reset device if input_register_device() fails
Probe marks the device DRIVER_OK with virtio_device_ready() before
calling input_register_device(). If registration fails, the error path
cleared vi->ready and called del_vqs() while the device was still live,
so the device could keep DMA to queues that were already torn down.
Match remove/freeze: call virtio_reset_device() on that path before
tearing down the virtqueues. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost-vdpa: protect config_ctx from being freed under the config callback
vhost_vdpa_config_cb() loads v->config_ctx and signals it without taking
a reference and without holding any lock:
struct eventfd_ctx *config_ctx = v->config_ctx;
if (config_ctx)
eventfd_signal(config_ctx);
VHOST_VDPA_SET_CONFIG_CALL replaces that field and drops what is normally
the last reference to the old context:
swap(ctx, v->config_ctx);
if (ctx)
eventfd_ctx_put(ctx);
eventfd_ctx_put() drops the last kref and frees the context immediately,
with no RCU grace period, so a callback that has already loaded the
pointer goes on to dereference freed memory. The two sides share no
lock: the ioctl runs under vhost_dev.mutex, while the parent invokes the
callback from its own interrupt or workqueue context.
This is not the reopen refcount underflow fixed by commit f6bbf0010ba0
("vhost-vdpa: fix use-after-free of v->config_ctx"), which was about
vhost_vdpa_config_put() leaving a stale pointer behind. Here the pointer
is maintained correctly and it is the read side that is unprotected.
With VDUSE as the parent this is reachable from userspace with access to
/dev/vduse (root by default). VDUSE_DEV_INJECT_CONFIG_IRQ queues
dev->inject, and vduse_dev_irq_inject() runs the callback under VDUSE's
own dev->irq_lock, which vhost does not hold. vduse_dev_reset() does
flush_work(&dev->inject), but VHOST_VDPA_SET_CONFIG_CALL never goes
through reset, so an inject already in flight is not waited for. A
process that injects config interrupts on the VDUSE fd while another
thread swaps the call fd on the vhost-vdpa fd hits it in seconds:
BUG: KASAN: slab-use-after-free in native_queued_spin_lock_slowpath
Read of size 4 at addr ffff888107d21808 by task kworker/u17:1/2993
Workqueue: vduse-irq vduse_dev_irq_inject
Call Trace:
native_queued_spin_lock_slowpath+0x97/0x5b0
_raw_spin_lock_irqsave+0xd4/0xe0
eventfd_signal_mask+0x69/0x120
vhost_vdpa_config_cb+0x34/0x50
vduse_dev_irq_inject+0x46/0x60
process_one_work+0x468/0x950
Allocated by task 2992:
do_eventfd+0x50/0x200
__x64_sys_eventfd2+0x2e/0x40
Freed by task 2992:
eventfd_ctx_put+0xb9/0xc0
vhost_vdpa_unlocked_ioctl+0x116c/0x2190
Add a spinlock covering every access to config_ctx, so the callback
either signals a context that is still alive or observes NULL, and the
put happens only once no callback can reach the old value.
Clearing the parent's callback before the put would not be enough: of the
in-tree set_config_cb() implementations only VDUSE takes a lock, the rest
store the pointer unlocked, so that would not order against an in-flight
invocation. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio: fix use-after-free in unregister_virtio_device()
device_unregister() is device_del() plus put_device(). When the caller
holds no extra reference, that drops the last one and runs the release
callback, which for several transports frees the memory the embedded
struct virtio_device sits in. unregister_virtio_device() then calls
virtio_debug_device_exit(), which reads dev->debugfs_dir out of the freed
object.
Affected transports are the ones whose release callback frees and whose
remove path takes no reference: virtio_mmio, virtio_vdpa, virtio_uml,
mlxbf-tmfifo and virtio_ccw. virtio_pci is unaffected because
virtio_pci_remove() brackets the call with get_device() and put_device().
Remove the debugfs entries before the device can go away. They are only
accessed through the protected debugfs interface, so
debugfs_remove_recursive() waits for in-progress file operations before
returning. Tearing them down while the device is still alive is therefore
safe.
Reproduced on User-Mode Linux with CONFIG_KASAN and CONFIG_VIRTIO_DEBUG
by unbinding a virtio-uml device:
BUG: KASAN: slab-use-after-free in virtio_debug_device_exit+0x36/0x4d
Read of size 8 at addr 00000000616e0b10 by task init/1
__asan_report_load8_noabort
virtio_debug_device_exit+0x36/0x4d
unregister_virtio_device+0x48/0x75
virtio_uml_remove
platform_remove
device_release_driver_internal
unbind_store
Freed by task 1:
kfree
virtio_uml_release_dev
device_release
kobject_put
put_device
device_unregister
With this applied, the report is gone and unbind is clean. |
| NVIDIA GPU Display Driver for Linux contains a vulnerability where an unprivileged user could cause a use-after-free condition by issuing a sequence of driver commands. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, denial of service and information disclosure. |
