| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Reserve extra CQ slot for the fence completion CQE
The RX completion queue is sized to hold exactly one CQE per posted RX WQE.
MANA_FENCE_RQ makes hardware post an additional CQE_RX_OBJECT_FENCE after
the packet CQEs. The current sizing reserves no extra slot for it and in
rare cases, CQ has no guaranteed slot for the fence CQE when it is full of
packet CQEs. This can lead to dropping the fence completion while the
driver waits holding RTNL lock throughout the timeout duration.
Reserve one extra CQE slot for CQE_RX_OBJECT_FENCE. mana_gd_alloc_memory()
requires queue_size to be a power-of-two and at least MANA_PAGE_SIZE;
the reservation pushes cq_size past a power-of-two, so round up the CQ size
in mana_create_rxq(). |
| NVIDIA GPU Display Driver for Windows contains a vulnerability in the kernel mode layer where an attacker could cause an incorrect buffer size calculation. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| `gx_binres_theme_load()` sizes its theme buffer for the theme it was asked for, and allocates it even when the resource holds no theme with that id. A theme id at or past the theme count declared by the resource gets a buffer of zero bytes. The load pass then walks past the end of the theme table, takes whatever follows as a theme header, and writes a `GX_THEME` and its tables into that zero-byte buffer. |
| A heap-buffer-overflow vulnerability exists in the APNG (Animated PNG) file loader of GIMP. This flaw occurs when the `fcTL` width exceeds the `IHDR` width, leading to pixel data being written past the end of a heap allocation. Additionally, a heap-based buffer overflow exists in the DDS plug-in due to a BPP mismatch in the `load_layer()` function. Both vulnerabilities can be triggered by opening a specially crafted image file, potentially leading to code execution. |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.1.16.0, A crafted 1-bit contiguous cmyk tiff is exposed through a native uint1 imagespec, so callers allocate a bit-packed buffer. tiffinput::read_native_scanline_locked() nevertheless invokes tiffinput::bit_convert() with 8-bit output and writes one expanded byte per value into that smaller buffer, resulting in a heap out-of-bounds write and memory corruption. The affected implementation is identified by src/tiff.imageio/tiffinput.cpp, TIFFInput::bit_convert(), TIFFInput::read_native_scanline_locked(), PHOTOMETRIC_SEPARATED, 1-bit CMYK, and native uint1 ImageSpec, which define the relevant source path, functions, state, and trigger. This issue is fixed in 3.1.16.0. |
| Strings optimized for Latin-1 displaying Latin-1 characters cause incorrect String.arg() formatting by an incorrect buffer size calculation, causing out-of-bounds reading. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs-srv: Fix integer underflow in process_read and process_write
usr_len is read from a network-supplied message field (le16_to_cpu)
and used to compute data_len = off - usr_len without validating that
usr_len <= off. A malicious RDMA client can send usr_len > off causing
an integer underflow, resulting in data_len wrapping to a huge size_t
value which is then passed to the rdma_ev callback as a memory length,
leading to out-of-bounds memory access.
Fix by reading and validating usr_len <= off before rtrs_srv_get_ops_ids()
in both process_read() and process_write(), ensuring the early return
path acquires no reference and has no resource leak. |
| A flaw was found in rsyslog. An unauthenticated remote attacker can trigger a heap buffer overflow in the RainerScript `replace()` function by sending specially crafted syslog messages. This vulnerability arises from an incorrect buffer size calculation during string replacement, causing memory corruption. Successful exploitation can lead to a denial of service (DoS) for the affected system. |
| Incorrect calculation of buffer size vulnerability in Altera Trusted Firmware on HPS allows Overflow Buffers.
This issue affects Trusted Firmware: through socfpga_v2.14.0. |
| An incorrect buffer size calculation in the epoch key generator in OpenVPN ovpn-dco-win version 2.0.0 through 2.8.3 allows a remote authenticated peer to trigger a heap-based buffer overflow and kernel memory corruption via a crafted data packet, resulting in a system crash (denial of service). |
| A unit confusion in BusyBox TLS Montgomery reduction buffer allocation causes a pre-authentication heap buffer overflow when processing a crafted ClientKeyExchange message. |
| ImageMagick before 7.1.2-31 contains a policy bypass vulnerability in the UHDR encoder that fails to perform policy checks during buffer allocation for image pixels. Attackers can bypass resource policies by processing specially crafted UHDR images, potentially causing denial of service through excessive memory allocation. |
| snappy-java through 1.1.10.8 contains a buffer overflow vulnerability in typed Snappy.uncompress*Array methods that allocate output arrays by dividing uncompressed length by element size but pass the undivided length to native code. Attackers controlling compressed input can cause misaligned length values to write past array bounds with attacker-controlled bytes, corrupting heap memory. |
| Rsyslog is a rocket-fast system for log processing. From 8.2110.0 until 8.2604.0, the optional imhttp module's parse_auth_header function in contrib/imhttp/imhttp.c allocates a zero-byte heap buffer with calloc(0, len) when an HTTP Basic Authorization value exceeds its fixed work buffer, then passes that pointer to apr_base64_decode. An unauthenticated remote attacker can send an oversized encoded credential to an imhttp endpoint configured for Basic Authentication, causing decoded data to overwrite adjacent heap memory before credential validation. Deployments that do not install, load, and use imhttp with Basic Authentication are not affected. The demonstrated impact is a process crash that interrupts log collection, and code execution has not been demonstrated. This issue is fixed in version 8.2604.0. |
| SAIL is a cross-platform library for loading and saving images with support for animation, metadata, and ICC profiles. Prior to 1.0.0, sail_codec_load_frame_v8_xbm() in src/sail-codecs/xbm/xbm.c allocates the decoded pixel buffer using the X11 one-byte-per-literal layout, but an X10 static short file causes the flat decode loop to write two file-controlled bytes per literal. When ceil(width/8) produces an odd row stride, the X10 literal count includes a padding byte for every row, but the destination has no space for those bytes, so loading the XBM through sail_load_from_file, sail_load_from_memory, or sail_start_loading_* produces a forward heap overwrite that scales with image height. The X11 static char path is not affected. The overwrite can corrupt process state, cause reliable crashes, and potentially enable code execution in a susceptible consuming application. This issue is fixed in version 1.0.0. |
| rabbitmq-c is a C-language AMQP client library for RabbitMQ. Prior to 0.16.0, a malicious AMQP server can send an undersized connection.tune.frame_max value during amqp_login(), and rabbitmq-c accepts the value in amqp_login_inner() in librabbitmq/amqp_socket.c. amqp_tune_connection() in librabbitmq/amqp_connection.c uses frame_max to reallocate the outbound buffer without enforcing AMQP_FRAME_MIN_SIZE. Immediate serialization of connection.tune-ok through amqp_frame_to_bytes() writes beyond the undersized heap allocation, causing memory corruption and likely denial of service. An on-path attacker can also trigger the flaw against plaintext AMQP traffic. Code execution is theoretically possible but was not demonstrated. This issue is fixed in version 0.16.0. |
| Incorrect calculation of buffer size in Windows iSCSI allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix out-of-bounds access in writeback_store()
Patch series "zram: fix stale scan bounds after reinitialization".
Both writeback_store() and read_block_state() derive their table scan
bounds from zram->disksize before acquiring dev_lock. If the device is
reset and reinitialized with a smaller disksize between that read and lock
acquisition, the bound can describe the old table while the scan operates
on the new one. This can lead to out-of-bounds slot accesses.
Move both bound calculations under dev_lock so each bound remains
consistent with the table throughout its scan. Keep the fixes separate
because the affected interfaces originate from different commits and can
be backported independently.
This patch (of 2):
writeback_store() calculates the table scan bounds before taking dev_lock.
A reset followed by reconfiguration with a smaller disksize can therefore
replace zram->table while writeback_store() is waiting for the lock. Once
it acquires the lock, it sees an initialized device but scans the new
table using the old upper bound, resulting in an out-of-bounds access.
Calculate the number of pages while holding dev_lock so the scan bound
matches the table protected by the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix integer overflow in tipc_recvmsg() and tipc_recvstream()
In tipc_recvmsg(), the copy length is computed as:
copy = min_t(int, dlen - offset, buflen);
buflen is size_t but min_t(int, ...) casts it to int. When buflen
exceeds INT_MAX (e.g. 0xFFFFFFFF via io_uring provided buffers), it
wraps negative, wins the comparison, and the negative copy length
propagates to simple_copy_to_iter() where int-to-size_t promotion
makes it SIZE_MAX, triggering a WARN_ON. tipc_recvstream() has the
same pattern.
Kernel panic - not syncing: kernel: panic_on_warn set ...
RIP: 0010:simple_copy_to_iter+0x9e/0xd0 (net/core/datagram.c:521)
Call Trace:
__skb_datagram_iter+0x123/0x8b0 (net/core/datagram.c:402)
skb_copy_datagram_iter+0x77/0x1a0 (net/core/datagram.c:534)
tipc_recvmsg+0x3d7/0xe80 (net/tipc/socket.c:1934)
io_recvmsg+0x47e/0xda0
Fix by changing min_t(int, ...) to min_t(size_t, ...) in both
functions. The result is always <= (dlen - offset), which is bounded
by TIPC maximum message size (0x1ffff bytes), so the implicit
narrowing on assignment to int copy is always safe. |
| Some Hikvision intercom products utilize an immutable factory value which should be obtained from local network or physical interaction with the device within their main card, which may allow attackers to forge a legitimate main card, thereby gaining the permission to issue cards. |
