| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A DHCP server, or anyone on the LAN who answers a DISCOVER first, can make the client read about a
kilobyte past the end of the received message.
The option walk keeps a pointer and an offset in step, and the only bound check uses the offset:
```c
/* addons/dhcp/nxd_dhcp_client.c:7538, 7572 */
while (i < length - 1)
{
...
size = *(++data); /* data moves 1: type -> length byte */
data += size + 1; /* data moves size + 1 more */
i += size + 1; /* i moves only size + 1 */
}
```
A TLV option occupies size + 2 bytes. `data` is advanced by size + 2 in total, `i` by size + 1, so
the offset falls one byte behind the real read position for every option the walk skips. After
enough skipped options the check `i < length - 1` still holds while `data` is already past the end
of the message, and the subsequent read of the type and length bytes comes from whatever follows.
A single OFFER carrying a long run of skippable options is enough:
```
ERROR: AddressSanitizer: heap-buffer-overflow
READ of size 1 at 0x61b000000794 thread T5
#0 _nx_dhcp_search_buffer addons/dhcp/nxd_dhcp_client.c:7541
#1 _nx_dhcp_get_option_value addons/dhcp/nxd_dhcp_client.c:7082
0x61b000000794 is located 164 bytes to the right of 1648-byte region
```
A well formed OFFER through the same path is handled normally, the client records the offer and
moves to REQUESTING, so the difference is the option layout rather than the harness.
The read runs in the DHCP client thread while the client is still unconfigured, so it happens on
every boot in reach of a hostile DHCP responder. The values read are used to configure the
interface, which is how the disclosed bytes become observable.
Advance `i` by size + 2, or derive the bound from `data` rather than keeping a second counter. |
| An unauthenticated client can drain the RTSP server's packet pool with a couple of dozen requests
that carry a Session header the parser cannot convert.
The Session branch returns the raw NetX error code instead of an RTSP status code:
```c
/* addons/rtsp/nx_rtsp_server.c:2754 */
status = _nx_utility_string_to_uint(field_value_ptr, field_value_length, &session_id);
if (status)
{
return(status); /* NX_INVALID_PARAMETERS / NX_SIZE_ERROR / NX_OVERFLOW */
}
```
Every other branch of the same function maps its failure to an RTSP status first. The CSeq branch
eighteen lines earlier does exactly that (line 2736 returns NX_RTSP_STATUS_CODE_BAD_REQUEST). The
raw code then reaches `_nx_rtsp_server_error_response_send` (nx_rtsp_server.c:1234), which does not
recognise it, takes a path that returns without releasing the response packet it already allocated,
and the block never goes back to the pool.
Six requests with an empty Session header against a 22 packet pool:
```
valid requests: after request 6: pool available = 21, AFTER = 22 / 22
malformed requests: after request 6: pool available = 16, AFTER = 17 / 22
```
One block per request, not returned when the client disconnects. Twenty six requests take the pool
to zero and the server starts failing allocations, after which it serves nobody. If the pool is
shared with the rest of the application, as it is in the shipped sample, the rest of the stack
stops with it.
Convert the `_nx_utility_string_to_uint` failure in the Session branch into
NX_RTSP_STATUS_CODE_BAD_REQUEST the way the CSeq branch does, and release the response packet on
every exit path of `_nx_rtsp_server_error_response_send`. |
| Any host on the LAN can send two mDNS records and make the responder write past the end of its
transmit packet.
The string table stores each name in a slot rounded up to a multiple of four:
```c
/* addons/mdns/nxd_mdns.c:11436, 11443, 11447 */
memory_len = ((memory_len & 0xFFFFFFFC) + 8) & 0xFFFFFFFF;
...
len = *((USHORT*)(p - 2)); /* slot size, not string length */
if ((len == memory_len) && ... _nx_mdns_name_match(start, memory_ptr, memory_size) ...)
```
The lookup that decides whether an incoming name is already stored compares the rounded slot size,
so names of 12, 13, 14 and 15 characters share one bucket. A second name in the bucket is answered
with the pointer to the first, and the record then carries a string up to three bytes longer than
the length the caller accounted for. `_nx_mdns_packet_rr_add` (nxd_mdns.c:8911) sizes its only
bound check from that stale length, and `_nx_mdns_name_string_encode` writes the real string.
Two PTR records are enough, both ordinary mDNS responses to a `_http._tcp` query, with owner names
whose lengths fall in the same bucket:
```
==87491==ERROR: AddressSanitizer: heap-buffer-overflow
WRITE of size 1 at 0x611000000124 thread T5
#0 _nx_mdns_name_string_encode addons/mdns/nxd_mdns.c:13096
#1 _nx_mdns_packet_rr_add addons/mdns/nxd_mdns.c:8911
0x611000000124 is 0 bytes to the right of 228-byte region
```
The overflow is one to three bytes of attacker-influenced name data past `nx_packet_data_end`. In a
normal pool that lands in the next packet in the same pool rather than in a redzone, so the visible
effect is a corrupted neighbouring packet or a corrupted pool free list rather than a clean crash.
Compare the slot size against the stored string length before declaring a match, or keep the
string length in the slot header and return it to the caller so the encoder and the bound check
agree. |
| The security fix for CVE-2025-0728 in eclipse-threadx NetX Duo refactors error handling in the HTTP server PUT process to use a shared cleanup label, but this unified cleanup path unconditionally calls fx_file_close() even when the file was never successfully opened. Multiple error branches jump to the shared cleanup label before any file open operation has occurred, causing fx_file_close() to operate on an uninitialized file handle, leading to undefined behavior, double-close issues, or memory corruption. |
| A denial-of-service vulnerability exists in the NetX IPv6 component functionality of Eclipse ThreadX NetX Duo. A specially crafted network packet of "Packet Too Big" with more than 15 different source address can lead to denial of service. An attacker can send a malicious packet to trigger this vulnerability. |
| In Eclipse Foundation NextX Duo before 6.4.4, a module of ThreadX, the _nx_secure_tls_process_clienthello() function was missing length verification of
certain SSL/TLS client hello message: the ciphersuite length and
compression method length. In case of an attacker-crafted message with
values outside of the expected range, it could cause an out-of-bound
read. |
| In NetX Duo version before 6.4.4, the component of Eclipse Foundation ThreadX, there was an incorrect bound check resulting it out by two out of bound read. |
| In NextX Duo before 6.4.4, in the HTTP client module, the network support code for Eclipse Foundation ThreadX, the parsing of HTTP header fields was missing bounds verification. A crafted server response could cause undefined behavior. |
| In NetX Duo before 6.4.4, the networking support module for Eclipse Foundation ThreadX, there was a potential out of bound read issue in _nx_icmpv6_validate_options() when handling a packet with ICMP6 options. |
| In NextX Duo's snmp addon versions before 6.4.4, a part of the Eclipse Foundation ThreadX, an attacker could cause an out-of-bound read by a crafted SNMPv3 security parameters. |
| In NetX Duo before 6.4.4, the networking support module for Eclipse Foundation ThreadX, there was a potential out of bound read issue in _nx_ipv4_packet_receive() when handling unicast DHCP messages that could cause corruption of 4 bytes of memory. |
| In Eclipse Foundation NetX Duo before 6.4.4, the networking support module for Eclipse Foundation ThreadX, there was a potential out of bound read issue in _nx_ipv4_option_process() when processing an IPv4 packet with the timestamp option. |
| In NetXDuo version before 6.4.4, a networking support module for Eclipse Foundation ThreadX, in the DHCPV6 client there was an unchecked index extracting the server DUID from the server reply. With a crafted packet, an attacker could cause an out of memory read. |
| In USBX before 6.4.3, the USB support module for Eclipse Foundation ThreadX, there was a potential out of bound read issue in _ux_host_class_hid_report_descriptor_get()
when parsing a descriptor of an USB HID device. |
| In NetX Duo before 6.4.4, the networking support module for Eclipse Foundation ThreadX, there was a potential out of bound read issue in _nx_ip_packet_receive() function when received an Ethernet with type set as IP but no IP data. |
| In NetX Duo before 6.4.4, the networking support module for Eclipse Foundation ThreadX, there was a potential out of bound read issue in _nx_ipv4_packet_receive() function when received an Ethernet frame with less than 4 bytes of IP packet. |
| In NetX Duo version before 6.4.4, the component of Eclipse Foundation ThreadX, there was an incorrect bound check in_nx_secure_tls_proc_clienthello_supported_versions_extension() in the extension version field. |
| In NetX Duo version before 6.4.4, the component of Eclipse Foundation ThreadX, there was a potential out of bound read in _nx_secure_tls_process_clienthello() because of a missing validation of PSK length provided in the user message. |
| In NetX Duo component HTTP server functionality of Eclipse ThreadX NetX Duo before
version 6.4.3, an attacker can cause an integer underflow and a
subsequent denial of service by writing a very large file, by specially
crafted packets with Content-Length smaller than the data request size. A
possible workaround is to disable HTTP PUT support.
This issue follows an uncomplete fix in CVE-2025-0728. |
| In NetX HTTP server functionality of Eclipse ThreadX NetX Duo before
version 6.4.3, an attacker can cause an integer underflow and a
subsequent denial of service by writing a very large file, by specially
crafted packets with Content-Length in one packet smaller than the data
request size of the other packet. A possible workaround is to disable
HTTP PUT support.
This issue follows an incomplete fix of CVE-2025-0727 |
