| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was identified in HKUDS AnyTool 0.1.0. Affected is the function subprocess.run of the file anytool/local_server/main.py of the component Execute Endpoint. The manipulation of the argument command/shell leads to os command injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability has been found in Ziroom ZHOME A0101 1.0.1.0. This issue affects some unknown processing of the file /api/ZRnetwork/ping. Such manipulation of the argument url leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix xmit_frame/xmit_buf leaks on mgnt-frame error paths
issue_beacon(), issue_probersp() and issue_asocrsp() obtain a management
xmit_frame together with its xmit_buf from the driver's fixed-size
management-TX pools via alloc_mgtxmitframe(). On the normal path the frame
is handed to dump_mgntframe(), which transfers ownership and eventually
returns both objects to their pools (the frame and, for beacons, the buf
in rtl8723bs_mgnt_xmit(); other bufs via the pending-xmitbuf/TX-completion
path).
Several error/edge paths return early after a successful
alloc_mgtxmitframe() but before dump_mgntframe(), so ownership is never
transferred and neither object is freed:
- issue_beacon(): beacon larger than 512 bytes
- issue_probersp(): cur_network->ie_length > MAX_IE_SZ
- issue_probersp(): kzalloc() of the SSID scratch buffer fails
- issue_asocrsp(): pkt_type is neither ASSOCRSP nor REASSOCRSP
Because alloc_mgtxmitframe() removes the frame and buf from their free
lists (list_del_init) without placing them on any pending list, an
orphaned pair is on no list and referenced by nobody, so it is only
reclaimed at driver teardown. Repeated hits progressively exhaust the
management-TX pools until alloc_mgtxmitframe() returns NULL and the
interface can no longer send beacons or probe/assoc responses.
Free the frame and buffer on these paths, matching the existing correct
error handling in issue_assocreq(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix the possible bioc_list memory leak during error
There are two possible ways to leak bioc memory on
btrfs_ordered_extent::bioc_list:
- An error occurred for btrfs_insert_one_raid_extent()
Then the function btrfs_insert_raid_extent() immediately return
without freeing any bioc in the bioc_list.
- An ordered extent hit an IO error
In that case the ordered extent will have BTRFS_ORDERED_IOERR set, and
skip the call on btrfs_insert_raid_extent() completely.
Fix the problem by:
- Introduce a new helper, btrfs_cleanup_ordered_bioc_list()
Which will remove all bioc from the bioc_list, and release the bioc.
- Call the above helper for btrfs_insert_raid_extent()
So that the cleanup helper is always called no matter what.
- Call the above helper for btrfs_finish_one_ordered()
This is called just before the final release on the ordered extent.
This was reported by Sashiko when reviewing another patch. |
| Snipe-IT is an IT asset/license management system. Prior to 8.6.1, POST /two-factor has no rate limiting, lockout, or attempt counter, allowing an attacker with valid credentials to submit unlimited TOTP guesses against the three accepted codes created by config/google2fa.php window=1. A successful guess creates a fully authenticated session. When two_factor_enabled is 1, POST /account/profile with two_factor_optin=0 can disable two-factor authentication without OTP reverification, while required mode 2 prevents that opt-out. An administrator can also use POST /api/v1/users/two_factor_reset to clear another user's secret. This issue is fixed in version 8.6.1. |
| Unauthenticated Denial of Service Attack in Two Factor <= 0.16.0 versions. |
| crmne/ruby_llm at commit fa6f279847d6d7027814539d9c0dfc3bbdfd2a83 contains polynomial-time regular expression denial-of-service conditions in think-tag response parsing on Ruby 3.1.x. A malicious or anomalous model response containing many unterminated <think> tags can cause excessive CPU consumption in two consecutive regular expressions and delay chat-completion processing |
| An unauthenticated command injection vulnerability in the /goform/fast_setting_internet_set endpoint of Tenda AC18 v15.03.05.05 allows attackers to execute arbitrary commands via a crafted payload injected into the mac parameter. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: rate limit unmapped SID errors
A client can include many structurally valid but unmapped SIDs in a DACL.
Logging every mapping failure lets one request generate hundreds of kernel
error messages.
Rate limit the message to prevent an authenticated client from flooding
the kernel log. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix dma mapping leak in stmmac_tso_xmit()
In stmmac_tso_xmit(), if the DMA mapping of an skb fragment fails, the
frame is dropped but the DMA mappings already created for the linear
part and for the fragments mapped before the failure are never
unmapped, leaking DMA mappings.
Fix the leak by walking back over the descriptors used by the frame and
releasing each of them with stmmac_free_tx_buffer(). Moreover, release
the descriptors with stmmac_release_tx_desc() unmapping the DMA buffers. |
| IEEE C37.118 Synchrophasor protocol dissector memory leak in 4.6.0 to 4.6.8 and 4.4.0 to 4.4.18 allows denial of service |
| A vulnerability was identified in 0xshariq github-mcp-server up to 52e764a7d66eac1726fce02ca7bb5a638571801a. This issue affects the function child_process.exec of the file src/github.ts of the component Git Remove MCP Tool. Such manipulation of the argument File leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet. |
| LightLLM through 1.2.0 contains a memory exhaustion vulnerability in the NCCL control channel when started with --pd_trans_mode nccl, allowing unauthenticated attackers to exhaust KV-transfer worker memory. Attackers can call the exposed_set_value method to store unbounded key-value pairs without size limits, causing the worker process to crash and triggering node failure. |
| A flaw has been found in Ziroom ZHOME A0101 1.0.1.0. This vulnerability affects the function set_time_zone of the file /api/ZRFirmware/set_time_zone. This manipulation of the argument hostname/zonename causes command injection. It is possible to initiate the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in Ziroom ZHOME A0101 1.0.1.0. This affects the function set_syslog of the file /api/ZRnetwork/set_syslog. The manipulation of the argument conloglevel/log_size results in command injection. The attack may be performed from remote. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Issue summary: A malicious remote peer may flood the local QUIC
stack with NEW_CONNECTION_ID frames by avoiding a limit check on
how many connection IDs the remote QUIC stack can use.
Impact summary: The local QUIC stack sends a RETIRE_CONN_ID frame
for every NEW_CONNECTION_ID frame it receives. The RETIRE_CONN_ID
frame is dispatched via the Control Frame Queue (CFQ). If the remote
peer also withholds ACKs, then it can force the local stack
to allocate ~400MB (depending on ACK delay).
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: RFC 9000 sections 5.1.1 and 5.1.2 [1] describe the mechanism
by which a remote peer can notify the local QUIC stack to change the
destination connection ID (a.k.a. CID) the local stack uses to
identify the connection at the remote peer. Each CID is associated
with a sequence number. The sequence number is transmitted
in NEW_CONNECTION_ID and RETIRE_CONNECTION_ID frames to identify the CID
which is being either associated with a connection or retired.
The remote peer sends a NEW_CONNECTION_ID frame to let the local stack know
a new CID is being associated with an existing connection. The
NEW_CONNECTION_ID frame carries the new CID, its sequence number, and the
retire-prior-to number. The retire-prior-to identifies existing
CIDs that are to be retired. The local QUIC stack must send a
RETIRE_CONNECTION_ID for every destination CID whose sequence number
is less than retire-prior-to. The CID becomes retired after the
local stack receives an ACK for its RETIRE_CONNECTION_ID frame.
Although the OpenSSL QUIC stack supports at most one destination CID
for every connection, it can be tricked into processing more than
one RETIRE_CONNECTION_ID frame per connection. The OpenSSL QUIC
stack currently retires the destination CID as soon as it receives
the NEW_CONNECTION_ID, while in fact the destination CID must
be retired after an ACK for the RETIRE_CONNECTION_ID frame is received.
Correcting the flawed logic also fixes the backlog growth.
[1] https://datatracker.ietf.org/doc/html/rfc9000#name-issuing-connection-ids
FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary. |
| simple-git, an interface for running git commands in any node.js application, enables applications to execute Git operations from JavaScript. Prior to 4.0.0, the default blockUnsafeOperationsPlugin compares parsed option names with literal dangerous option spellings while Git accepts unambiguous long-option abbreviations. Attacker-influenced push arguments such as abbreviated --receive-pack or --exec forms can therefore bypass detectVulnerableFlags, reach git push against a local or file remote or an attacker-influenced receive-pack target, and cause Git to invoke an attacker-selected command in consumers that expose those arguments. The clone-side abbreviation handling does not protect the push path. This issue is fixed in 4.0.0. |
| simple-git, an interface for running git commands in any node.js application, enables applications to execute Git operations from JavaScript. Prior to 4.0.0, the default blockUnsafeOperationsPlugin does not completely reject configuration includes supplied through customArgs to git.clone(). The missing include.path classification permits Git to load an attacker-controlled configuration file, and the initial remediation does not cover includeIf.<condition>.path, allowing the same file-loading primitive through a conditional include. A loaded configuration can set an executable Git option such as core.sshCommand, which Git invokes during the clone operation with the privileges of the Node.js process. Exploitation requires the application to pass attacker-influenced custom arguments and requires an attacker-controlled file that the process can read. This issue is fixed in 4.0.0. |
| Issue summary: OpenSSL QUIC stack does not enforce connection
level flow control for streams. Remote peers may send more bytes
as long as they fit within the stream flow control limits.
Impact summary: A malicious remote peer may exploit the lack of connection
flow control for streams to make the QUIC stack receive ~100MB of memory
instead of 768 KiB (default flow control window size).
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: The local QUIC stack advertises two flow control limits
to its remote peer: stream flow control limit and connection flow
control limit. The remote peer must follow both limits when transmitting
stream data.
Whenever the local QUIC stack receives a stream frame, it validates
that the size of the received stream frame stays within flow control limits.
If either limit is exceeded (stream level or connection level), then
the QUIC stack must close the connection with a flow control error.
The vulnerable OpenSSL QUIC stack enforces the stream-level but not
the connection-level limit. To exploit the issue, three conditions must be met:
- the remote peer opens several streams
- each stream must stay within the stream-level flow control limit
- there must be no zero-offset byte sent on any of the streams
(to prevent the vulnerable QUIC stack from consuming data).
By meeting the conditions above, the remote peer may make the local stack
allocate 2 x MAX_STREAMS x (stream flow control limit) bytes
of memory. MAX_STREAMS defaults to 100, and the limit applies to both
bidirectional and unidirectional streams, making it 200 in total. The default
flow control window for a stream is 512kB. The remote peer may
force the vulnerable QUIC stack to allocate 100MB of heap per connection.
FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-rdma: fix queue leak when connect backlog is exceeded
When pending disconnecting queues exceed the backlog limit, the
connect path only drops the device reference and leaks the newly
allocated queue and its IB resources. |
