| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix acl.sd_buf memory leak and invalid sd_size error handling
1. When ndr_decode_v4_ntacl() fails, the code jumped to free_n_data
which only freed n.data, skipping kfree(acl.sd_buf) and leaking
the buffer. Zero-initialize struct xattr_ntacl acl, reorder error
labels to out_free to release acl.sd_buf on all error paths.
2. if (acl.sd_size < sizeof(struct smb_ntsd)) is true, original code
returned success without freeing sd_buf and left stale *pntsd.
Set rc = -EINVAL before jumping to out_free to return error code and
free buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: fix leaks and online flag on radix_tree_insert failure
When radix_tree_insert() fails in blkg_create(), the error path has two
issues:
1. blkg->online is set to true unconditionally, even when the blkg was
never fully inserted. Move the assignment inside the success block.
2. The error path calls blkg_put() without first calling
percpu_ref_kill(). Because the refcount is still in percpu mode,
percpu_ref_put() only does this_cpu_sub() without checking for zero,
so blkg_release() is never triggered. This permanently leaks the
blkg memory, its percpu iostat, policy data, the parent blkg
reference, and the cgroup css reference — the latter preventing the
cgroup from ever being destroyed.
Fix by replacing blkg_put() with percpu_ref_kill(), matching the pattern
used in blkg_destroy(). |
| Missing release of memory after effective lifetime in Active Directory Domain Services allows an unauthorized attacker to deny service over a network. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.136.Final and 4.2.16.Final, the RedisArrayAggregator Redis codec clears retained partial aggregate state when the maxNestedArrayDepth limit is exceeded, but it does not clear the same state when the sibling maxElements limit is exceeded. A peer can start a valid RESP array, send a bulk string child, then send a nested array header longer than the configured maxElements. Netty throws a decoder exception in decodeRedisArrayHeader, but the existing partial aggregate remains retained in the handler. If the application leaves the channel alive after the exception, later messages are still consumed into the pre-error aggregate, allowing an unauthenticated peer to keep attacker-controlled aggregate state alive across a security-limit exception and pin retained pooled buffers. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. |
| A vulnerability in the Eclipse Vert.x toolkit causes a memory leak in TCP servers configured with TLS and SNI support. When processing an unknown SNI server name assigned the default certificate instead of a mapped certificate, the SSL context is erroneously cached in the server name map, leading to memory exhaustion. This flaw allows attackers to send TLS client hello messages with fake server names, triggering a JVM out-of-memory error. |
| A vulnerability in the Eclipse Vert.x toolkit results in a memory leak due to using Netty FastThreadLocal data structures. Specifically, when the Vert.x HTTP client establishes connections to different hosts, triggering the memory leak. The leak can be accelerated with intimate runtime knowledge, allowing an attacker to exploit this vulnerability. For instance, a server accepting arbitrary internet addresses could serve as an attack vector by connecting to these addresses, thereby accelerating the memory leak. |
| vLLM through 0.29.0 fails to properly clean up decode-side metadata for rejected inference requests in prefill/decode disaggregated deployments. Remote attackers can submit requests with max_tokens=0 to exhaust decode-worker memory without bound until the worker restarts. |
| vLLM Mooncake connector through 0.29.0 fails to properly manage GPU KV cache block ownership when concurrent child requests share a single transfer ID in prefill/decode disaggregated deployments. Attackers can trigger GPU memory exhaustion by submitting completion requests with multiple prompts, causing orphaned KV cache blocks to accumulate until process restart and eventually preventing legitimate requests from executing. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: ep: Fix device refcount leak in the error path of MHI device creation
mhi_ep_create_device() takes one device reference for the UL channel and
another for the DL channel after allocating the transfer device. These
references are normally released by mhi_ep_destroy_device() before the
device itself is removed.
If dev_set_name() or device_add() fails, the error path currently drops
only one reference. The remaining channel references keep the device
from being released and leave the channels associated with a device that
was never registered.
Route both failures through a common unwind path that drops the DL
channel reference, the UL channel reference, and the initial reference
from device_initialize(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: release the internal TCP sock on IPPROTO_SMC socket creation failure
IPPROTO_SMC sockets create an internal TCP sock ("clcsock") from the
proto->init hook. When socket creation fails after proto->init has
run - e.g. a cgroup BPF program attached to BPF_CGROUP_INET_SOCK_CREATE
denies the socket - sk_common_release() only invokes sk_prot->destroy
if it is set, but neither smc_inet_prot nor smc_inet6_prot defines it,
and smc_destruct() returns early unless sk_state is SMC_CLOSED. As a
result, every failing socket(AF_INET, SOCK_STREAM, IPPROTO_SMC) call
leaks one tcp_sock, so an unprivileged task able to attach a deny-all
BPF_CGROUP_INET_SOCK_CREATE program to its own cgroup can grow kernel
memory unboundedly.
Add a .destroy hook to both protos that releases the clcsock via
smc_clcsock_release(). smc_sk_init() hashes the sock into the smc
hashinfo before the clcsock is created, and smc_diag dumps walk that
hash dereferencing smc->clcsock without taking clcsock_release_lock,
while sk_common_release() calls .destroy before .unhash. Unhash the
sock before releasing the clcsock, as __smc_release() does, so a
concurrent dump cannot observe the release; the second unhash in
sk_common_release() is a no-op. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: fix cn20k mailbox lifetime on repeated rvu_mbox_init()
rvu_mbox_init() is called separately for AF-PF mailboxes during probe
and for AF-VF mailboxes when SR-IOV is enabled. Each call used to
allocate a new ng_rvu object, leaking the first allocation when the
pointer was overwritten on the second call.
Sharing one ng_rvu across both paths exposed several teardown bugs:
the error path freed all cn20k mailbox DMA and kfree()d ng_rvu even
when only the failing init type should be unwound, leaving live AF-PF
mailbox memory in use after an AF-VF init failure. mutex_init() was
also re-run on the AF-VF path while AF-PF mailbox handlers could still
hold rvu->mbox_lock. Probe and SR-IOV failure paths did not release
cn20k mailbox DMA either, since cleanup only happened in rvu_remove().
Allocate ng_rvu once with devm_kzalloc(), initialize mbox_lock in the
same block, unwind only the mailbox memory for the failing init type,
and free cn20k mailbox DMA from the probe and pci_enable_sriov()
error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: free stashed qentry before overwrite in REQ_ADD_LINK to ADD_LINK transition
When smc_llc_event_handler() transitions the local LLC flow from
SMC_LLC_FLOW_REQ_ADD_LINK to SMC_LLC_FLOW_ADD_LINK on arrival of an ADD_LINK
request, it calls smc_llc_flow_qentry_set() unconditionally:
if (lgr->llc_flow_lcl.type == SMC_LLC_FLOW_REQ_ADD_LINK) {
lgr->llc_flow_lcl.type = SMC_LLC_FLOW_ADD_LINK;
smc_llc_flow_qentry_set(&lgr->llc_flow_lcl, qentry);
...
}
A CONFIRM_LINK or ADD_LINK_CONT arriving while flow->type is
SMC_LLC_FLOW_REQ_ADD_LINK is stashed into flow->qentry via the
SMC_LLC_CONFIRM_LINK / SMC_LLC_ADD_LINK_CONT handler (which stores into
flow->qentry for any non-NONE flow type). When the subsequent ADD_LINK
arrives, the REQ_ADD_LINK branch overwrites flow->qentry with the new pointer
without first freeing the stashed allocation, leaking one kmalloc object.
The stashed entry has no consumer: smc_llc_wait() is only called from
llc_add_link_work, which is not yet scheduled while the flow type remains
REQ_ADD_LINK. No waiter is sleeping on llc_msg_waiter at this point.
It is safe to unconditionally free any stashed qentry before
the overwrite.
Call smc_llc_flow_qentry_del() before smc_llc_flow_qentry_set() in the
REQ_ADD_LINK branch. smc_llc_flow_qentry_del() already checks flow->qentry
before freeing, so the normal path where no entry is stashed is a no-op. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: pcf8563: fix clock provider leak on unbind
pcf8563_clkout_register_clk() registers the CLKOUT clock provider with
of_clk_add_provider(), but nothing ever unwinds it: there is no
of_clk_del_provider() call and the driver has no remove callback. Each
of_clk_add_provider() allocates a struct of_clk_provider, takes a
reference on the OF node and adds an entry to the global of_clk_providers
list, none of which is released when the device is unbound. Every
bind/unbind (or module reload) therefore leaks a provider structure and
an of_node reference.
The clock itself is already device-managed (devm_clk_register()); only
the provider registration was not. Use devm_of_clk_add_hw_provider() so
the provider is removed automatically on unbind. Tie it to the parent
i2c device, whose OF node carries the #clock-cells and clock-output-names
properties (the RTC class device has no OF node of its own). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: free preauth sessions on connection teardown
SMB3.1.1 multichannel binding preserves the preauthentication hash in a
preauth_session between the NTLM negotiate and authenticate requests.
The binding NTLM negotiate allocates this object and returns
STATUS_MORE_PROCESSING_REQUIRED. If the client disconnects before it sends
the authenticate request, neither the authenticate nor error cleanup paths
free the object.
Release any remaining preauthentication sessions when tearing down the
connection. Initialize the list when allocating the connection so that this
cleanup is safe regardless of the negotiated dialect. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: free zones array on device power-off
null_init_zoned_dev() allocates dev->zones when a zoned device is powered
on, but null_del_dev() never frees it on power-off; dev->zones is only
freed later in null_free_dev(), when the configfs directory is removed. If
the device is powered off and then on again, null_init_zoned_dev()
allocates a new array and overwrites the dev->zones pointer, leaking the
previous allocation each power cycle.
Free dev->zones in null_del_dev() via null_free_zoned_dev() to solve it.
And calling null_free_zoned_dev() in null_free_dev() is no longer necessary
because every caller already invokes null_del_dev() first: via
nullb_group_drop_item() before nullb_device_release(), in the
null_add_dev() error path of null_create_dev(), and in null_destroy_dev().
Remove the redundant call.
And take &lock around zone_cond_store() in the two store wrappers to
serialize dev->zones check-and-deref against its alloc/free, which already
run under &lock. The reason there was no problem before is that only
nullb_device_release() or null_exit() frees the dev->zones, which
guarantees that subsequent users won't access the configfs interface. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: call ksmbd_proc_cleanup() on module init failure
When a later initializer fails, the unwind chain releases resources
created after procfs and then jumps directly to class_unregister().
Returning an error from module_init() leaves the proc tree and its
per-CPU counters allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark tracing_multi trampolines as ftrace managed
Since tracing_multi link does not set ftrace_managed, it would fail to
release the tracing_multi link when attaching tracing_multi link and
then attaching fentry link.
[ 3.714215] WARNING: kernel/bpf/trampoline.c:1727 at bpf_trampoline_multi_detach+0x20b/0x240, CPU#1: test_progs/97
...
[ 3.733170] bpf_tracing_multi_link_release+0x14/0x30
[ 3.733890] bpf_link_free+0x58/0x130
[ 3.734414] bpf_link_release+0x23/0x30
Fix it by setting 'ftrace_managed = true' in register_fentry_multi(). |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: xilinx: formatter_pcm: fix stream_data leak on open error
In xlnx_formatter_pcm_open(), stream_data is allocated and
adata->play_stream or adata->capture_stream is assigned early. If a
later step, such as snd_pcm_hw_constraint_step() or
snd_pcm_hw_constraint_integer(), fails, the function returns the error
immediately. ALSA does not call the close callback when open fails, so
stream_data is leaked and the stream pointer is left dangling, pointing
to a substream that ALSA frees. A later interrupt would then call
snd_pcm_period_elapsed() on the freed substream.
Free stream_data and clear the stream pointer on the error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ubi: Fix rollback for explicit UBI device numbers
ubi_init_attach() rolls back module initialization failures by scanning
ubi_devices[0..i-1], where i is the mtd= parameter index. That assumes
the parameter index matches the UBI device number.
That assumption is not true when mtd= specifies an explicit ubi_num. A
successfully attached device can be stored at a higher ubi_devices[]
slot, and a later failure can miss it during rollback.
Scan the full ubi_devices[] array and detach by the actual array index,
matching the way UBI devices are stored. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: sunplus: fix error handling in sp_uphy_init()
Fix the error paths of sp_uphy_init() to undo exactly what each stage
did: return directly if clk_prepare_enable() fails, release only the clock
if reset_control_deassert() fails, and jump to err_reset if
update_disc_vol() fails so the clock and reset are not leaked. |
