| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper state validation in Downloads in Google Chrome prior to 154.0.8037.57 allowed a remote attacker to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Medium) |
| In Anjvision YSSD-RTMP-H5 firmware version 3.3.2.4, an empty-body POST to /setUserConfig, dispatched through the web server's SOAP-RPC handler, silently downgrades the administrator password to the default value and corrupts the in-memory authentication state until the device reloads. The handler does not verify the session's privilege level, so any authenticated user can trigger it. |
| Improper Verification of Cryptographic Signature and Improper Certificate Validation in the OPC UA driver of Apache PLC4X (PLC4J) allows an attacker in a network position between client and server to impersonate the OPC UA server and to read, forge or modify secure-channel traffic, including user credential ssent by the client.
The defect manifests differently depending on the version:
- In 0.9.0 through 0.11.0 a failed message-signature check is only logged and never enforced, and there is no mechanism to verify the server certificate: it is taken from the unauthenticated GetEndpoints discovery response and used to encrypt the user's password.
- In 0.12.0 through 0.13.1 the signature check is inverted (valid signatures are rejected, invalid ones accepted), and server certificates are accepted without a trust anchor by default.
- In all affected versions the default security policy is None. Starting with 0.12.0 the driver additionally continues silently at a weaker security policy than the one configured, and starting with 0.13.0 endpoint selection prefers the weakest matching endpoint.
Users checking only for one of these mechanisms may wrongly conclude they are unaffected.
This issue affects Apache PLC4X: from 0.9.0 before 1.0.0.
Users are recommended to upgrade to version 1.0.0, which fixes the issue. Version 1.0.0 verifies message signatures correctly, refuses to connect unless the server certificate can be verified against a configured trust store or pinned certificate, defaults to Basic256Sha256 with SignAndEncrypt, and fails the
connection if the negotiated security policy is weaker than the configured one. |
| PyJWT is a Python implementation of JSON Web Token standards. From 2.9.0 until 2.14.0, PyJWKSet does not catch the plain ValueError raised for malformed RSA JWK components by RSAAlgorithm.from_jwk in jwt/api_jwk.py. This occurs when a JWK Set contains a malformed RSA key alongside otherwise usable keys. As a result, one malformed member aborts construction of the entire PyJWKSet. Consequently, applications can experience authentication failures or request-level denial of service. This issue is fixed in version 2.14.0. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 8.0.6, the FTP parser in src/app-layer-ftp.c treats a RETR or STOR command sent before PORT or PASV negotiation as a fatal application-layer error instead of a recoverable protocol event. The fatal state disables FTP application-layer parsing for the remainder of the TCP flow, so later commands can evade parser-dependent rules and logging; IPS mode instead drops the flow. This issue is fixed in version 8.0.6. |
| A vulnerability was detected in ag-ui-protocol ag-ui up to 2026-09-23. This affects an unknown part of the file SseParser.kt of the component Kotlin Community SDK. Performing a manipulation results in handling of exceptional conditions. The attack may be initiated remotely. The pull request to fix this issue awaits acceptance. |
| A vulnerability was found in Trusted Domain Project OpenDMARC up to 1.4.2. This vulnerability affects the function strcasecmp in the library libopendmarc/opendmarc_policy.c. The manipulation results in handling of exceptional conditions. The attack can be executed remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in Trusted Domain Project OpenDMARC up to 1.4.2. This affects the function opendmarc_policy_parse_dmarc in the library libopendmarc/opendmarc_policy.c. The manipulation of the argument fo/rf/ri/pct/sp/adkim/aspf/rua/ruf leads to handling of exceptional conditions. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device
hu->serdev is NULL for hci_uart attached via non-serdev paths, but
qca_setup() unconditionally calls serdev_device_get_drvdata(hu->serdev)
and dereferences the result, causing a NULL pointer dereference.
Fix by guarding the dereference with a NULL check, consistent with the
rest of qca_setup(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Do not block on tag allocation in scsi_eh_lock_door()
scsi_eh_lock_door() is called from scsi_restart_operations() while the
host is still in the SHOST_RECOVERY state, i.e. before the host is
switched back to SHOST_RUNNING and scsi_run_host_queues() restarts the
queues. It allocates a request via scsi_alloc_request() with no flags,
so blk_mq_get_tag() may block waiting for a free sched tag when all tags
are already in use.
Those tags can be held by commands that were just requeued by
scsi_eh_flush_done_q() during error handling. Such commands cannot be
dispatched until the host leaves SHOST_RECOVERY and
scsi_run_host_queues() is called - which only happens *after*
scsi_eh_lock_door() returns.
This forms a circular dependency:
- scsi_eh_lock_door(), running in the SCSI error handler thread, waits
for a sched tag held by a requeued command;
- the requeued command cannot complete and release its sched tag until
the error handler thread leaves scsi_restart_operations() and restart
the queues.
For devices with a single driver tag (e.g. USB storage) it is a
guaranteed deadlock and I/O that can never be submitted. This problem
has also been reproduced in our environment.
Locking the door is a best-effort operation, and scsi_eh_lock_door()
already returns silently when the request allocation fails. Pass
BLK_MQ_REQ_NOWAIT to scsi_alloc_request() so the allocation fails
instead of blocking when no tag is available. This breaks the circular
dependency and allows the error handler to finish restarting the queues,
after which the pending commands are dispatched normally. |
| Improper Check for Unusual or Exceptional Conditions vulnerability in phoenixframework phoenix (Presence JavaScript client) allows an attacker with ordinary channel access to cause a persistent client-side denial of service against every viewer of a presence channel topic.
This vulnerability is associated with program files assets/js/phoenix/presence.js and program routines Presence.syncState and Presence.syncDiff.
The Phoenix JavaScript presence client checks whether a presence already exists with a bare truthiness test (state[key]) instead of an own-property check. Presence keys can be attacker-controlled, because applications track presences under a username or id supplied by the client. A user who joins a channel choosing a key that is an Object.prototype member name (__proto__, constructor, toString, hasOwnProperty, and similar) makes that lookup return JavaScript's built-in Object.prototype instead of undefined. Because the prototype is truthy, the code treats it as an existing presence and reads .metas.map(...) off it, which throws an uncaught TypeError.
The exception propagates out of the presence message handler, so the local state is never updated and onSync() never fires. Because the malicious key is tracked on the server, it is re-pushed on every presence update and keeps re-throwing, so presence sync stays broken for every viewer of that channel topic until the attacker leaves. Both syncState and syncDiff use the same unsafe existence-check pattern. The impact is limited to the affected topic and is a read-time confusion of the prototype object, not a mutation of Object.prototype (it is not prototype pollution).
This issue affects phoenix: from 1.2.0-rc.0 before 1.5.15, from 1.6.0-rc.0 before 1.6.17, from 1.7.0-rc.0 before 1.7.24, and from 1.8.0-rc.0 before 1.8.9; phoenix: from 1.2.0-rc.0 before 1.5.15, from 1.6.0-rc.0 before 1.6.17, from 1.7.0-rc.0 before 1.7.24, and from 1.8.0-rc.0 before 1.8.9. |
| mport is the MidnightBSD Package Manager. Prior to 2.7.8, libmport/util.c did not make every truncated, corrupt, or failed zstd stream fatal in mport_decompress_zstd(), and libmport/fetch.c did not consistently propagate those failures to index-fetch callers. A malicious or faulty mirror could supply compressed package index data that caused ZSTD_decompressStream() or an output write to fail while leaving partial index output available for later use, resulting in package-index integrity loss or denial of service. This issue is fixed in version 2.7.8. |
| A vulnerability was identified in sfturing hosp_order up to 627f426331da8086ce8fff2017d65b1ddef384f8. The affected element is the function MD5.getMD5 of the file ssm_pro/src/main/java/cn/sfturing/utils/MD5.java of the component User Password Handler. The manipulation leads to one-way hash without salt. The attack may be initiated remotely. A high degree of complexity is needed for the attack. The exploitability is described as difficult. The exploit is publicly available and might be used. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The project was informed of the problem early through an issue report but has not responded yet. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.137.Fina and 4.2.17.Final, io.netty.handler.ssl.SslClientHelloHandler#decode checks the wrong offset before reading the four-byte TLS handshake header, so a ClientHello whose handshake header spans records can cause an IndexOutOfBoundsException and invoke select(ctx, null). This selects the default SslContext instead of the SNI-specific context. In deployments where per-SNI clientAuth=REQUIRE is the sole mutual TLS gate, the default SslContext uses clientAuth=NONE or clientAuth=OPTIONAL, and no application-layer certificate verification exists, an unauthenticated remote attacker can bypass the protected route's mutual TLS requirement. This issue is fixed in versions 4.1.137.Final and 4.2.17.Final. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's Utility::copyInternetAddressAndPort and QUIC client-address paths reconstruct scoped IPv6 addresses through addressAsString and Ipv6Instance. The string includes a percent scope identifier that inet_pton cannot parse, causing an exception or abort. Kernel-provided scoped IPv6 destinations in ORIGINAL_DST transparent-proxy deployments, and affected QUIC connection paths, can therefore terminate the process. The relevant scope boundary is that the HTTP use_http_header override rejects scoped addresses earlier; the advisory's crash path requires a kernel-provided original destination or the affected QUIC path. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1. |
| Steeltoe is an open source project that provides a collection of libraries that helps users build cloud-native applications. From 4.0.0 until 4.3.0, EurekaDiscoveryClient deserializes the registry response as one unit, and an unrecognized actionType or status, a non-Boolean isCoordinatingDiscoveryServer, or a nonnumeric timestamp can abort the entire response. A principal that can register or update an instance can cause all connected Steeltoe clients to receive an empty or stale instance list until the malformed registration is removed. The JsonInstanceInfoConverter, BoolStringJsonConverter, and LongStringJsonConverter parsing paths are affected. This issue is distinct from the earlier DataCenterInfo.name parsing vulnerability. This issue is fixed in version 4.3.0. |
| NivoCart through 2.4.0 contains a destructive configuration write vulnerability in the admin password reset controller that allows unauthenticated attackers to disable password recovery by supplying an invalid code parameter. Attackers can send a GET request with a missing or incorrect code to rewrite the config_password setting to 0, disabling self-service password recovery until an administrator manually re-enables it. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: fix handling of zero-length records on the rx_list
Each recvmsg() call must process either
- only contiguous DATA records (any number of them)
- one non-DATA record
If the next record has different type than what has already been
processed we break out of the main processing loop. If the record
has already been decrypted (which may be the case for TLS 1.3 where
we don't know type until decryption) we queue the pending record
to the rx_list. Next recvmsg() will pick it up from there.
Queuing the skb to rx_list after zero-copy decrypt is not possible,
since in that case we decrypted directly to the user space buffer,
and we don't have an skb to queue (darg.skb points to the ciphertext
skb for access to metadata like length).
Only data records are allowed zero-copy, and we break the processing
loop after each non-data record. So we should never zero-copy and
then find out that the record type has changed. The corner case
we missed is when the initial record comes from rx_list, and it's
zero length. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sparx5: fix sleep in atomic context in MAC table access
sparx5_set_rx_mode() runs with netif_addr_lock_bh held and iterates
dev->mc via __dev_mc_sync(), which per address calls sparx5_mc_sync() /
sparx5_mc_unsync() -> sparx5_mact_learn() / sparx5_mact_forget(). These
take sparx5->lock, a mutex, and then poll the MAC access command
register with readx_poll_timeout(). A mutex may block, which is not
allowed from atomic context.
Convert the driver to the new .ndo_set_rx_mode_async callback introduced
in commit 3554b4345d85 ("net: introduce ndo_set_rx_mode_async and
netdev_rx_mode_work"). The async callback is invoked from process
context, so the mutex and sleeping completion poll can remain.
Observed with CONFIG_PROVE_LOCKING, CONFIG_DEBUG_SPINLOCK,
CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_ATOMIC_SLEEP enabled:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 217, name: ip
preempt_count: 201, expected: 0
Call trace:
__might_resched+0x144/0x248
__might_sleep+0x48/0x7c
__mutex_lock+0x74/0x850
mutex_lock_nested+0x24/0x30
sparx5_mact_learn+0x78/0x100
sparx5_mc_sync+0x40/0x54
__hw_addr_sync_dev+0xc4/0x170
sparx5_set_rx_mode+0x4c/0x58
__dev_set_rx_mode+0x64/0xa4
__dev_open+0x1ec/0x26c |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: do not leak an hci_conn when a second LE connect is rejected
create_le_conn_complete() decides whether the failed connection is
still pending by comparing it against hci_lookup_le_connect(), which
returns the first LE connection in BT_CONNECT. That is the same
connection only while at most one is pending.
Two can be pending. Connections created on the passive scan path sit
in BT_CONNECT with HCI_CONN_SCANNING set and are invisible to
hci_lookup_le_connect() until hci_le_create_conn_sync() clears the
flag when their command is issued, so the -EBUSY guard in
hci_connect_le() does not prevent a second connection from being
queued while the first is still on the scan path. Whenever two
connections are in BT_CONNECT at once, the lookup may return one
connection while create_le_conn_complete() is reporting the failure
of the other; the early exit then drops the error and hci_conn_failed()
never runs on the connection that failed.
The controller also rejects a second HCI_OP_LE_CREATE_CONN issued
while another connection creation is still outstanding, per Core Spec
Vol 4, Part E. The spec calls for Command Disallowed there; the
bcm43438 observed here answers with an LMP/LL error code instead,
which bt_to_errno() maps to the -EPROTO (-71) in the log below.
The leaked connection stays in BT_CONNECT forever, and because
hci_connect_le() refuses to dial while hci_lookup_le_connect() finds
anything, every subsequent attempt to reach any peer fails with
-EBUSY and no command reaches the controller at all.
Seen on a bcm43438 with two BLE peers polled on the same interval
(state 5 is BT_CONNECT; both handles are UNSET ones, allocated from
the ida above HCI_CONN_HANDLE_MAX):
Bluetooth: hci1: Opcode 0x2013 failed: -71
# hcitool con
< LE 14:9C:EF:03:68:81 handle 3840 state 5 lm CENTRAL
< LE C4:D3:6A:8C:B5:38 handle 3841 state 5 lm CENTRAL
A btmon capture across the next ten minutes of connect attempts
contains no HCI_OP_LE_CREATE_CONN at all; outgoing LE connections
do not recover until the adapter is reset. With this change the same
scenario fails the rejected connection cleanly and further connects
to both peers go through.
Ask about the connection itself instead of about the device. |
