| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The NetX Duo MQTT client leaks the packet carrying a malformed PUBLISH message. Each malformed PUBLISH costs one packet, or one chain of packets, from the network driver's receive pool, and nothing returns it. A peer that can deliver a few dozen such messages exhausts the pool and stops all inbound network traffic on the device until it is rebooted. |
| NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer where an unprivileged user could cause a memory leak in error paths leading to kernel memory exhaustion. A successful exploit of this vulnerability might lead to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix the possible bioc_list memory leak during error
There are two possible ways to leak bioc memory on
btrfs_ordered_extent::bioc_list:
- An error occurred for btrfs_insert_one_raid_extent()
Then the function btrfs_insert_raid_extent() immediately return
without freeing any bioc in the bioc_list.
- An ordered extent hit an IO error
In that case the ordered extent will have BTRFS_ORDERED_IOERR set, and
skip the call on btrfs_insert_raid_extent() completely.
Fix the problem by:
- Introduce a new helper, btrfs_cleanup_ordered_bioc_list()
Which will remove all bioc from the bioc_list, and release the bioc.
- Call the above helper for btrfs_insert_raid_extent()
So that the cleanup helper is always called no matter what.
- Call the above helper for btrfs_finish_one_ordered()
This is called just before the final release on the ordered extent.
This was reported by Sashiko when reviewing another patch. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hsr: free learned nodes on device setup failure
hsr_dev_finalize() can fail after a lower-device RX handler has
already been registered (slave A is added before the failable slave B
and interlink adds). RX handlers run in softirq regardless of the
master's state, so frames received in that window can learn dynamic
nodes into node_db, and the error unwind never releases them.
Free both owned dynamic databases in the unwind, mirroring
hsr_dellink(). proxy_node_db is provably empty on every current error
exit (only interlink RX feeds it, and the interlink add is the last
failable step) and is freed for symmetry. The order is safe:
hsr_del_port() unregisters each RX handler with synchronize_net()
before hsr_del_nodes() runs, which removes remaining entries with
list_del_rcu() and defers their release with call_rcu() for readers
already under RCU. |
| An unauthenticated client can drain the RTSP server's packet pool with a couple of dozen requests
that carry a Session header the parser cannot convert.
The Session branch returns the raw NetX error code instead of an RTSP status code:
```c
/* addons/rtsp/nx_rtsp_server.c:2754 */
status = _nx_utility_string_to_uint(field_value_ptr, field_value_length, &session_id);
if (status)
{
return(status); /* NX_INVALID_PARAMETERS / NX_SIZE_ERROR / NX_OVERFLOW */
}
```
Every other branch of the same function maps its failure to an RTSP status first. The CSeq branch
eighteen lines earlier does exactly that (line 2736 returns NX_RTSP_STATUS_CODE_BAD_REQUEST). The
raw code then reaches `_nx_rtsp_server_error_response_send` (nx_rtsp_server.c:1234), which does not
recognise it, takes a path that returns without releasing the response packet it already allocated,
and the block never goes back to the pool.
Six requests with an empty Session header against a 22 packet pool:
```
valid requests: after request 6: pool available = 21, AFTER = 22 / 22
malformed requests: after request 6: pool available = 16, AFTER = 17 / 22
```
One block per request, not returned when the client disconnects. Twenty six requests take the pool
to zero and the server starts failing allocations, after which it serves nobody. If the pool is
shared with the rest of the application, as it is in the shipped sample, the rest of the stack
stops with it.
Convert the `_nx_utility_string_to_uint` failure in the Session branch into
NX_RTSP_STATUS_CODE_BAD_REQUEST the way the CSeq branch does, and release the response packet on
every exit path of `_nx_rtsp_server_error_response_send`. |
| IEEE C37.118 Synchrophasor protocol dissector memory leak in 4.6.0 to 4.6.8 and 4.4.0 to 4.4.18 allows denial of service |
| Net::IDN::Punycode versions from 2.302 before 2.590 for Perl leak the output buffer on every rejected label in decode_punycode.
The XS backend allocates the scalar it returns before it validates the input, sizing the buffer at twice the input length. The scalar is released only on the success path, so each of the three croaks that reject a label leaves the scalar and its buffer allocated. Nothing bounds the label length in the to-Unicode direction, since the 63-byte DNS limit is checked only when converting to ASCII.
Only the XS backend is affected.
A sender who supplies invalid labels grows the process by twice the label length per rejected call, with no successful call needed. |
| In Wind River VxWorks 7 prior to 26.09, specific system call arguments can result in the process management subsystem failing to properly release allocated kernel memory before terminating the calling application. Fixed in Version 26.09 |
| Wind River VxWorks 7 24.03 through 26.03, a memory leak occurs under specific, non-default configuration states when processing specific service routines, causing the system to terminate operations before releasing allocated memory pools. Fixed in VxWorks 7 26.09 |
| Missing release of memory after effective lifetime in Windows Cryptographic Services allows an unauthorized attacker to deny service over a network. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy copies every decoded HTTP/2 Host header value before discarding it when :authority is already present. The discarded value bypasses saveHeader, so its bytes and count are not charged against request header limits. An unauthenticated client can use HPACK indexing to submit many references to a large Host value across a bounded number of streams, forcing extreme header-copy allocation and causing the proxy to be out-of-memory killed. The relevant scope boundary is that the demonstrated amplification uses HTTP/2 HPACK and the duplicate Host discard behavior. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, AppLayerParserSetTransactionInspectId() in src/app-layer-parser.c uses an inverted guard and marks only already-inspected transactions as inspected. On flows passed by a pass rule or pass-the-flow exception policy, detection is skipped, so completed transactions remain unmarked, are never freed, and are repeatedly rescanned. The per-flow list can grow without bound with quadratic cleanup cost, causing CPU and memory exhaustion. This issue is fixed in version 8.0.6. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.17 and 8.0.6, the SMB parser can retain force-completed transactions on flows where Suricata sees payload in only one direction, including async-oneside flows, because cleanup waits for inspection in the unseen direction. The transaction creation paths in rust/src/smb can exceed the intended SMB_MAX_TX bound, and cleanup repeatedly scans the growing list. Sustained one-directional SMB traffic can therefore cause unbounded per-flow state and CPU and memory exhaustion. This issue is fixed in versions 8.0.6 and 7.0.17. |
| In the Linux kernel, the following vulnerability has been resolved:
powercap: intel_rapl: Fix memory leak in rapl_add_package_cpuslocked()
When topology_physical_package_id()/topology_logical_die_id() returns
a negative value, rapl_add_package_cpuslocked() returns ERR_PTR(-EINVAL)
directly without freeing the rapl_package structure that was just
allocated by kzalloc_obj(), leaking memory on every failed package
addition.
Use the existing err_free_package label so that the allocation is
released on the error path. |
| Mini-XML 4.0.5 contains a memory leak vulnerability in mxml_load_data() during malformed XML parsing. Specially crafted XML input can cause text nodes allocated by mxmlNewText() to become unlinked before a parse error transfers control to the cleanup path. These orphaned nodes are not released, resulting in a persistent memory leak on each parsing attempt. Repeated attacker-controlled requests can cause cumulative memory exhaustion and denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: fsl-imx8mq-usb: fix typec switch leak on probe error path
If probe fails after imx95_usb_phy_get_tca() succeeds, the typec
switch leaks because the only cleanup path was in .remove(), which
never runs on probe failure.
Use devm_add_action_or_reset() so the switch is cleaned up on both
probe failure and driver removal. The imx95_usb_phy_put_tca() is no
longer needed, it will be removed in .remove() too. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix addr_filter_ranges lifetime
Lee Jia Jie reported that since event::addr_filter_ranges is used
under RCU, it should be RCU freed. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: add missing xa_destroy for sched_node_ids
Commit 16dfa49406bc ("ice: Introduce new parameters in ice_sched_node")
added a sched_node_ids xarray to the port info structure, but never called
xa_destroy on it.
Since xarrays can allocate internal memory, this can result in a memory
leak even if every element in the xarray has been removed.
The xarray is currently embedded in the port_info structure. This appears
to have been done because its use is within functions that take the
port_info as a primary argument.
However, this complicates managing the lifecycle of the field. The
port_info structure is allocated in ice_init_hw() using devm, and it is
not released until the devm cleanup when the driver is unloaded.
The ice_init_hw() function is called in many places, including devlink
reload, and possibly during DDP load after updating the Tx scheduler
layout.
Adding a call of xa_destroy to the ice_deinit_hw() causes Sashiko to raise
multiple concerns due to potential ordering issues and possible ways that
port_info could be a dangling reference.
To handle this, move the sched_node_ids out of port_info and into the hw
structure. All users of the array already have a pointer to hw anyways, and
there is only one sched_node_ids per adapter. While here, remove the overly
verbose comment explaining the nature of the sched_node_ids xarray.
Add the missing xa_destroy to the cleanup path and to ice_deinit_hw(),
ensuring that we properly release the xarray memory.
This was caught by Sashiko during development of unrelated code. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't leak dqacct if rhashtable insertion fails
LOLLM observes that xqcheck_mod_live_ino_dqtrx doesn't free the newly
allocated dqa object if rhashtable insertion fails. Fix this leak. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: destroy seen inode bitmap when we fail to add a dirpath
LOLLM observes a memory leak in xchk_dirtree_create_path if we create
the directory path object but appending the name to the path fails.
When this happens, we don't tear down the (empty) seen inode bitmap.
This is a pretty trivial error, but let's not leave logic bombs.
Do the same for a similar bug in xrep_dirtree_create_adoption_path. |
